I knew there was a leak from No3 injector pipe; this was cured by robbing a pipe from the spare engine and making sure the washers on the pumps connection did not leak, success there
![Very Happy :D](./images/smilies/icon_e_biggrin.gif)
I opted to take it off and put some gasket sealer on each side of the gasket; I left this to set, so I will try it again when I next travel up there.
Jeremy
![Image](http://www.classicmachinery.net/forum/images/userpix/112_2E86RK12SOW0K1685688995.jpg)
![Image](http://www.classicmachinery.net/forum/images/userpix/112_HHDZQM8X7BRN1685688995.jpg)
![Image](http://www.classicmachinery.net/forum/images/userpix/112_25IHO1J762DCS1685688995.jpg)
![Image](http://www.classicmachinery.net/forum/images/userpix/112_3KI2WDN4IZS481685688995.jpg)
![Image](http://www.classicmachinery.net/forum/images/userpix/112_JBKYMQLBE64Y1685688995.jpg)
![Image](http://www.classicmachinery.net/forum/images/userpix/112_2WZSWXIJUWOW01685688996.jpg)
![Image](http://www.classicmachinery.net/forum/images/userpix/112_3AMWDZN9UA2O81685688996.jpg)
![Image](http://www.classicmachinery.net/forum/images/userpix/112_2KIKZ04KM2IOW1685688996.jpg)
![Image](http://www.classicmachinery.net/forum/images/userpix/112_1RSHVPOJE7WOT1685688996.jpg)