Hello Everyone,
There were 5 of the above shovels commissioned to BCO (British Coal Opencast) in the mid 70s. The first 1 was owned by Wimpey & put to work @ its Maesgwyn Cap opencast coal site,near Glyneath. There was 1 owned & put to work @ Taylor Woodrows Trecatty site,Merthyr Tydfil & another 1 was owned by Fairclough,Parkinson Mining & put to work @ its Blindwells site in Tranent in Scotland.
The other 2 were BCO owned & were painted in BCOs light blue & white colour scheme.1 of these shovels went to the newly awarded F Shephard'Hill & Companies Glyn Glas coal site,near Llanebie in West Wales.
Does anyone know where the other 1 was first commissioned.I know that after the Glyn Glas contract was completed,the shovel was moved to the Wimpey Mining Ffos Las coal site,where it was put to work with the other BCO owned P&H 1900AL.Ffos Las started its contract in 1983,so I think the shovel in question worked on another contract before this site started?
I remember both these BCO P&H 1900AL shovels retired & parked next to one & other.They had previously been over-haul by the Wimpey maintenance crew @ Ffos Las.
The Wimpey owned P&H 1900AL shovel was relocated to their Gilfach Iago site in Llanebie,after the Maesgwyn Cap site was completed & retired there.
The Fairclough Parkinson Mining P&H 1900AL shovel was relocated from their Blindwells site to their Nant Helen site near Abercrave,Wales,& was a stand by machine,very rarely used.
The Taylor Woodrow P&H 1900AL shovel was relocated to their Chesterhouse coal site Northumberland & under went a complete refurbishment,with a longer boom,bigger & bail less bucket & a new paint colour. After Chesterhouse was completed,it was relocated to the new Taylor Woodrow Nadins & Highcross coal site,Swadlincote Derby.After the completed contract,it was cut up for scrap with a RB 195B shovel.
The Taylor Woodrow P&H 1900AL,was the only shovel,not to end its working life back down in the Land of my Fathers,South Wales.
I hope someone can put an answer to my question,
Regards,
Mark Williams.
P&H 1900AL shovels?
-
Topic author - Posts: 108
- Joined: Mon Apr 21, 2008 6:55 am
- Real name: Mark Williams
- Has thanked: 6 times
- Been thanked: 59 times
-
- Posts: 734
- Joined: Wed Jan 13, 2010 10:42 pm
- Real name: Ian Fletcher
- Location: Codnor - Derbyshire
- Has thanked: 534 times
- Been thanked: 148 times
- Flag:
- Contact:
-
- Posts: 734
- Joined: Wed Jan 13, 2010 10:42 pm
- Real name: Ian Fletcher
- Location: Codnor - Derbyshire
- Has thanked: 534 times
- Been thanked: 148 times
- Flag:
- Contact:
-
Topic author - Posts: 108
- Joined: Mon Apr 21, 2008 6:55 am
- Real name: Mark Williams
- Has thanked: 6 times
- Been thanked: 59 times
Re: P&H 1900AL shovels?
Hello Everyone,
Here are some P&H1900AL shovels I found on the net.I hope the owners don't mind me showing them.
Here are some P&H1900AL shovels I found on the net.I hope the owners don't mind me showing them.
-
Topic author - Posts: 108
- Joined: Mon Apr 21, 2008 6:55 am
- Real name: Mark Williams
- Has thanked: 6 times
- Been thanked: 59 times
Re: P&H 1900AL shovels?
Hello Chris,
I know the photo was yours,I hope you didn't mind me posting it.
The picture above it is the same shovel working @ the FPM Blindwells site @ Tranent in Scotland,where I think it first worked around the 1978 time onwards.
Regards,
Mark Williams.
I know the photo was yours,I hope you didn't mind me posting it.
The picture above it is the same shovel working @ the FPM Blindwells site @ Tranent in Scotland,where I think it first worked around the 1978 time onwards.
Regards,
Mark Williams.
-
- Posts: 132
- Joined: Sun Aug 05, 2007 12:51 pm
- Real name: chris lewis
- Has thanked: 5 times
- Flag:
Re: P&H 1900AL shovels?
No problem at all . I seem to have misplaced a pile of my old photos but I shall continue the hunt!
-
- Posts: 12
- Joined: Wed Nov 23, 2016 10:32 am
- Real name: Fritz Hanisch
- Location: Wiener Neudorf
- Been thanked: 7 times
- Flag:
- Contact:
Re: P&H 1900AL shovels?
Hi!
Does anybody know the weight and the bucket capacity of the early 1900 models?
Thanks!
There was at least one in operation at at "Erzberg" iron ore mine in Austria.
Here is a pic, I took in year 2000. Was the last time, I saw it there. Think they scrapped it in early 2000s...
Does anybody know the weight and the bucket capacity of the early 1900 models?
Thanks!
There was at least one in operation at at "Erzberg" iron ore mine in Austria.
Here is a pic, I took in year 2000. Was the last time, I saw it there. Think they scrapped it in early 2000s...
You do not have the required permissions to view the files attached to this post.
Best regards from Austria,
Fritz
------------------------------------------------------------
Visit our Forum: www.schwerlastaustria.at
Visit my YouTube-Channel: www.youtube.com/user/baggerfritz
Fritz
------------------------------------------------------------
Visit our Forum: www.schwerlastaustria.at
Visit my YouTube-Channel: www.youtube.com/user/baggerfritz
Who is online
Users browsing this forum: No registered users and 4 guests