JCB 3 1966 CYLINDER SEALS HELP REQUIRED

Talk about technical issues here. Questions and answers!

Topic author
stewarty905
Posts: 4
Joined: Mon Jun 10, 2013 11:52 pm
Real name: stewart

JCB 3 1966 CYLINDER SEALS HELP REQUIRED

Post #1 by stewarty905 » Tue Jun 11, 2013 10:16 pm

Hi,
Struggling to find the correct seal kit for the cylinder
I have fitted the rod seals part number 991/00003 they fit fine but the cylinder seal kit that came with it part number 2411/4009 does not fit ? Does anyone know the correct number i should be trying to get,they are old leather type seals for a 100mm cylinder.


philwheelton
Posts: 279
Joined: Sun Nov 06, 2011 2:09 am
Real name: phil wheelton
Has thanked: 1 time
Been thanked: 29 times
Flag: Great Britain

Re: JCB 3 1966 CYLINDER SEALS HELP REQUIRED

Post #2 by philwheelton » Tue Jun 11, 2013 11:06 pm

Which ram are you working on and do you have the rod and cylinder size's


martyn williams
Posts: 6393
Joined: Mon Nov 03, 2008 8:06 pm
Real name: MARTYN WILLIAMS
Location: South Wales
Has thanked: 296 times
Been thanked: 359 times

Re: JCB 3 1966 CYLINDER SEALS HELP REQUIRED

Post #3 by martyn williams » Wed Jun 12, 2013 4:43 am

I managed to get matched seals for my machines from a Cardiff supplier, called Seal master, they were good quality and not a bad price.They supplied everything including scraper seal.
Martyn


Topic author
stewarty905
Posts: 4
Joined: Mon Jun 10, 2013 11:52 pm
Real name: stewart

Re: JCB 3 1966 CYLINDER SEALS HELP REQUIRED

Post #4 by stewarty905 » Wed Jun 12, 2013 6:47 am

Phil the rod is 50mm,the cylinder is 100mm,I have done the rod seal thats all fine.


Topic author
stewarty905
Posts: 4
Joined: Mon Jun 10, 2013 11:52 pm
Real name: stewart

Re: JCB 3 1966 CYLINDER SEALS HELP REQUIRED

Post #5 by stewarty905 » Wed Jun 12, 2013 10:18 pm

This is a picture of the current seals
You do not have the required permissions to view the files attached to this post.


Topic author
stewarty905
Posts: 4
Joined: Mon Jun 10, 2013 11:52 pm
Real name: stewart

Re: JCB 3 1966 CYLINDER SEALS HELP REQUIRED

Post #6 by stewarty905 » Wed Jun 12, 2013 10:31 pm

another picture of seals only
You do not have the required permissions to view the files attached to this post.


smithhymac
Posts: 104
Joined: Wed Jun 22, 2011 9:00 pm
Real name: morgan smith
Location: Dorset, Great Britain
Has thanked: 44 times
Been thanked: 13 times
Flag: Great Britain

Re: JCB 3 1966 CYLINDER SEALS HELP REQUIRED

Post #7 by smithhymac » Fri Jun 21, 2013 9:35 pm

hi there!, this seal type is called 'Chevron seals' and tha size is 3 5/8 inch bore, Manchester seals 01618327922 have these in stock! or at least they did last summer when I resealed the rams on my jcb 3! ask for sally she is very switched on!


Return to “Tech Talk”

Who is online

Users browsing this forum: No registered users and 1 guest