Hi all.
The stabilizer leg levers are operating together how do I get them to work independently.
Thanks
Mitch
Stabilizer leg levers in cab
-
Topic author - Posts: 9
- Joined: Wed Feb 09, 2022 8:10 pm
- Real name: Mitch parsons
- Has thanked: 2 times
- Flag:
-
Topic author - Posts: 9
- Joined: Wed Feb 09, 2022 8:10 pm
- Real name: Mitch parsons
- Has thanked: 2 times
- Flag:
-
- Posts: 2
- Joined: Sat Oct 30, 2010 10:32 pm
- Real name: John
- Flag:
-
Topic author - Posts: 9
- Joined: Wed Feb 09, 2022 8:10 pm
- Real name: Mitch parsons
- Has thanked: 2 times
- Flag:
Re: Stabilizer leg levers in cab
Thank you for that. I'm starting to get it ready for the winter so I'll have ago with that.
Regards
Regards
-
- Posts: 312
- Joined: Thu Jul 04, 2019 11:44 am
- Real name: ian
- Has thanked: 126 times
- Been thanked: 117 times
- Flag:
Re: Stabilizer leg levers in cab
Not familiar with the model, but looking at the P7, the two leavers seem to share a common pivot pin, so a penetrant it a likely fix.
It's possible the anchor plate the levers attach to is loose, so both are moving together.
Once you get eyes-on, I think the problem will be clear.
It's possible the anchor plate the levers attach to is loose, so both are moving together.
Once you get eyes-on, I think the problem will be clear.
-
Topic author - Posts: 9
- Joined: Wed Feb 09, 2022 8:10 pm
- Real name: Mitch parsons
- Has thanked: 2 times
- Flag:
-
- Posts: 806
- Joined: Mon Sep 22, 2008 11:55 pm
- Real name: David
- Location: KENT
- Has thanked: 80 times
- Been thanked: 179 times
- Flag:
Re: Stabilizer leg levers in cab
I had a very similar problem on a fermec 860, I had to take the levers apart as the had corroded onto the shaft after i soaked everything in plusgas i eventually got them and the shaft of the. Digger and then got everything apart and made a new shaft the refitted everything with plenty of grease!
Who is online
Users browsing this forum: No registered users and 19 guests