uh oh!
Top soiling batters with scrapers..........always pays to go a bit steady!
Good time to change the cutting edge.....?
-
Topic author - Posts: 1606
- Joined: Sun Apr 19, 2009 2:54 pm
- Real name: clive gray
- Location: sussex,england
- Has thanked: 174 times
- Been thanked: 242 times
- Flag:
- Contact:
Good time to change the cutting edge.....?
You do not have the required permissions to view the files attached to this post.
-
- Posts: 774
- Joined: Sat Jan 23, 2010 7:11 pm
- Real name: graham
- Has thanked: 97 times
- Been thanked: 74 times
- Flag:
Re: Good time to change the cutting edge.....?
at least it stopped there clive ,and did not roll over and play dead
i was hoping to pop over and see the D8's again ,but i don't think i will get time
cheers graham
i was hoping to pop over and see the D8's again ,but i don't think i will get time
cheers graham
every village has one , is yours missing you
-
Topic author - Posts: 1606
- Joined: Sun Apr 19, 2009 2:54 pm
- Real name: clive gray
- Location: sussex,england
- Has thanked: 174 times
- Been thanked: 242 times
- Flag:
- Contact:
Re: Good time to change the cutting edge.....?
Hi Graham
I was lucky only a nudge with the 360 and she was back on all four!
As for the 8's, they've been really busy and cracking on apparently but I reckon rain will stop play.
Catch up soon.....wot r u on anyway?
Clive
I was lucky only a nudge with the 360 and she was back on all four!
As for the 8's, they've been really busy and cracking on apparently but I reckon rain will stop play.
Catch up soon.....wot r u on anyway?
Clive
-
- Posts: 774
- Joined: Sat Jan 23, 2010 7:11 pm
- Real name: graham
- Has thanked: 97 times
- Been thanked: 74 times
- Flag:
Re: Good time to change the cutting edge.....?
i now have a 06 3cx sitemaster plus ,only got it last sat ,and lets say it has not been cared for too well
i have discharged three grease cartridges into it now ,and it has just stopped squeaking
the grease that is working its way out looks like copperslip ,lucky its not too late to be saved ,it may just need bucket linkage bushes
just waiting for a Mr Langley to come and service it ,as the oil filter has 01 09 on it
the 590 case is back at the dealers having the transmission mountings put back on properly and then someone else can have it
still working for Clancy docwra via a subbie ,and work is picking up at bit ,but to be fair they have kept me very busy
we had a fair bit of rain in the night here ,so i would guess the 8's could have been sat today ,but it looks like a dryish week ahead
hows things down your end ,good i hope
cheers graham
i have discharged three grease cartridges into it now ,and it has just stopped squeaking
the grease that is working its way out looks like copperslip ,lucky its not too late to be saved ,it may just need bucket linkage bushes
just waiting for a Mr Langley to come and service it ,as the oil filter has 01 09 on it
the 590 case is back at the dealers having the transmission mountings put back on properly and then someone else can have it
still working for Clancy docwra via a subbie ,and work is picking up at bit ,but to be fair they have kept me very busy
we had a fair bit of rain in the night here ,so i would guess the 8's could have been sat today ,but it looks like a dryish week ahead
hows things down your end ,good i hope
cheers graham
You do not have the required permissions to view the files attached to this post.
every village has one , is yours missing you
-
- Posts: 774
- Joined: Sat Jan 23, 2010 7:11 pm
- Real name: graham
- Has thanked: 97 times
- Been thanked: 74 times
- Flag:
Re: Good time to change the cutting edge.....?
bigkit wrote:uh oh!
Top soiling batters with scrapers..........always pays to go a bit steady!
i see you have made it into this months classic plant mag clive ,someone has taken a few photo's
cheers graham
every village has one , is yours missing you
-
Topic author - Posts: 1606
- Joined: Sun Apr 19, 2009 2:54 pm
- Real name: clive gray
- Location: sussex,england
- Has thanked: 174 times
- Been thanked: 242 times
- Flag:
- Contact:
Re: Good time to change the cutting edge.....?
Hi Graham , apparently so. I've not seen it yet. My mum subscribes to CPM for my christmas present each year. I thought it was getting a little dull so I asked her to swap to Earthmovers..............and would you believe it the first month I don't get it I'M IN IT!
I'm off to the newsagents, I may be sometime.............................
I'm off to the newsagents, I may be sometime.............................
-
Topic author - Posts: 1606
- Joined: Sun Apr 19, 2009 2:54 pm
- Real name: clive gray
- Location: sussex,england
- Has thanked: 174 times
- Been thanked: 242 times
- Flag:
- Contact:
Re: Good time to change the cutting edge.....?
Why not, thats a nice offer . Save me an expedition in the snow ....besides I can't find any tennis rackets for my feet!
-
- Posts: 774
- Joined: Sat Jan 23, 2010 7:11 pm
- Real name: graham
- Has thanked: 97 times
- Been thanked: 74 times
- Flag:
Re: Good time to change the cutting edge.....?
stand by ,i will attempt to control the scanning machine
as if by magic an image should appear
as if by magic an image should appear
You do not have the required permissions to view the files attached to this post.
Last edited by jcb4cx on Tue Nov 30, 2010 9:59 pm, edited 1 time in total.
every village has one , is yours missing you
Return to “Accidents and Bogged in machines”
Who is online
Users browsing this forum: No registered users and 5 guests