Page 1 of 1
Brown Group help required
Posted: Sat Mar 06, 2010 10:41 am
by davej
I'm building a model of one of the low loaders operated by the brown group, but to do do the decals im after a decent copy of the logo,
hopefully someone on here might be able to help!
I've put some pics up on flickr ive got from the drivers son
http://www.flickr.com/photos/41229863@N06/ this should work!
dave
Re: Brown Group help required
Posted: Sat Mar 06, 2010 11:18 am
by Martyn Henley
Hi Dave..did you mean something like this
BROWN GROUP.pdf
if you have a problem opening this pdf file let me know please.
Martyn
Re: Brown Group help required
Posted: Sat Mar 06, 2010 11:45 am
by davej
You sir are a hero!!!!
that is spot on!
Dave
Re: Brown Group help required
Posted: Sat Mar 06, 2010 11:50 am
by Martyn Henley
dont take long when you have the right graphic design application .. i knocked that up when i was having me coffee
if you let me have the right sizes i can knock a sheet up for you to print straight off from your PC .. do you use water slide transfers or vinyl ?
Martyn
Re: Brown Group help required
Posted: Sat Mar 06, 2010 8:11 pm
by davej
i'll take you up on that!
i have all the graphical talent of a gnat!!!
i'll measure the model and pm you sizes!
i'm going to use some waterslide paper i think vinyl is too thick in 1/50
Dave
Re: Brown Group help required
Posted: Sat Mar 06, 2010 10:17 pm
by IBH
Thanks davej for the Flickr link- some really great photos especially stuff relating to the Brown group and surprises such as the Michigan dumptruck.
Re: Brown Group help required
Posted: Fri Mar 17, 2023 9:36 pm
by Garsdale
.
Re: Brown Group help required
Posted: Fri Mar 17, 2023 9:39 pm
by Garsdale
Here is one of theirs