Search found 4 matches
- Mon May 25, 2020 10:41 am
- Forum: Dumpers
- Topic: Newage 40M2 Gearbox
- Replies: 4
- Views: 2465
- Flag:
Re: Newage 40M2 Gearbox
Thanks Cobba for your help I pushed the Selector into the interlock assembly. When setting the gears with the selector fork,how would I know if the gearbox is in Neutral before pushing in the selector? Would it simply be easy to move the output shaft? Im not sure if I haven't aligned the clevis that...
- Mon May 25, 2020 12:58 am
- Forum: Dumpers
- Topic: Newage 40M2 Gearbox
- Replies: 4
- Views: 2465
- Flag:
Newage 40M2 Gearbox
Hello all, This is my first post. Ive got an old Thwaites 4000 dumper which I use only occasionally has been very good. It recently started winning so I took it apart and found the needle bearing had disintegrated and the housing was worn where the needle bearing sat. I had an engineering firm put i...
- Sat Oct 12, 2019 2:13 pm
- Forum: Excavators
- Topic: Engine stalls on Pel Job
- Replies: 5
- Views: 3969
- Flag:
Re: Engine stalls on Pel Job
Hi Gerard. The gearing seized and would not drive They told me to disconnect the 2nd speed pipe and drain and put in container. Start machine, put in 2nd and whichever pipe sprayed to connect to middle port. There was no difference in the amount of spay with the second switch on or off. http://www.c...
- Fri Oct 11, 2019 11:52 pm
- Forum: Excavators
- Topic: Engine stalls on Pel Job
- Replies: 5
- Views: 3969
- Flag:
Engine stalls on Pel Job
Hello all.Its my first time on here. Ive got an old Pel Job EB 406. Its been great since Ive had it which I only use occasionally. Ive recently changed the final drive with an aftermarket model. I put the hydraulics pipes as they were on the old unit. I had problems from that point and the second sp...