The Classic Machinery Network

Leon the flushing out could be a bit tedious, but needs to be done prior to completing all the adjustments. You will need to leave it to dry out also. Next question,what are the metallic shavings and where have they come from? Could it be just metal on metal wear or do you think it may be a bit more...

Leon If you remove the inspection plates on the top of both clutches, you will be able to see what is happening, and not happening when you pull the clutch levers.You should also be able to work out what adjustments are needed.You will also be able to see the adjustment happening when you get to rem...

Leon there was very little clutch on the left hand side, also the levers were out of spec. I followed what exactly what was set out in the maintenance sheet, without a result. went back up my mountain hideaway a couple of weeks later and removed the inspection plate on both the right and left hand c...

I have a 605c, it has 3 bolts on the starter. My starter was not turning the motor over easily either, and I too thought the battery was kaput. I removed the starter and took it to the local auto electrician, he said it would be full of gunk as the starter is located right under the fuel filters. Ov...

Can anyone tell me if there are any tricks or secrets to adjusting the steering clutches on a fiat 605c crawler dozer. I have made the adjustments as per the maintenance sheet, now I have no left hand clutch at all. I am in Aus and these forums are new to me. Am I on the right track for any feed bac...