Comair Holman TXR100 roller

Discuss pavers, rollers, mills and other paving equipment here

Topic author
dr268
Posts: 3
Joined: Fri Aug 03, 2018 6:09 pm
Real name: doug r
Flag: Isle of Man

Comair Holman TXR100 roller

Post #1 by dr268 » Fri Aug 17, 2018 3:48 pm

has anyone any information on a Comair Holman TXR100 as pictured below

It is owned by my local cricket club and although an ideal machine it is beginning to show its age and needs parts. Critical is the drive belt to the hydro, its a wide timing style belt .

I have googled with no luck at all.

I need to find a parts supplier and if very lucky a parts book

many thanks


Image
Image


Jeremy Rowland
Moderator
Posts: 7138
Joined: Sun Aug 05, 2007 8:36 pm
Real name: Jeremy Rowland
Has thanked: 1152 times
Been thanked: 960 times

Re: Comair Holman TXR100 roller

Post #2 by Jeremy Rowland » Fri Aug 17, 2018 11:22 pm

Hi Doug and welcome to CMN :wave: I would have thought that you would be able to get a drive belt through any decent bearing/drives supplier; just Google drive belt suppliers you should find somebody to help you out. :thumbup:

Jeremy


Topic author
dr268
Posts: 3
Joined: Fri Aug 03, 2018 6:09 pm
Real name: doug r
Flag: Isle of Man

Re: Comair Holman TXR100 roller

Post #3 by dr268 » Mon Aug 20, 2018 7:58 pm

Jeremy Rowland wrote:Hi Doug and welcome to CMN :wave: I would have thought that you would be able to get a drive belt through any decent bearing/drives supplier; just Google drive belt suppliers you should find somebody to help you out. :thumbup:

Jeremy


its a timing belt but about twice the width of a normal car one

we need the roller a lot as the cricket season is still on so hoped to get one and have it sitting just in case it fails as its not looking great

maybe wait until october then remove it and run round the bearing/belt shops


Return to “Paving Equipment”

Who is online

Users browsing this forum: No registered users and 1 guest