Hello guys
I am sorry to bring this subject up again, which has certainly been discussed many times. My 3cx project 8 suddenly stopped moving forward or backward. I was normally running in 4gear on a downhill road. before entering the hangar I engaged 2 gear while waiting for the gate to open and pushed the powershift lever forward but the machine did not advance. it was static in the middle of the road and doesn't move. I didn't hear any strange noises or do anything different, the machine just don't do anything. The gears go well but the shuttle does not take efect...
Any idea?
JCB 3cx project 8 not moving forward/backwards
-
Topic author - Posts: 46
- Joined: Wed Jan 27, 2021 12:09 am
- Real name: Hélio Sequeira
- Has thanked: 1 time
- Been thanked: 2 times
- Flag:
-
- Posts: 308
- Joined: Thu Jul 04, 2019 11:44 am
- Real name: ian
- Has thanked: 125 times
- Been thanked: 114 times
- Flag:
Re: JCB 3cx project 8 not moving forward/backwards
Check fuse C6 ('C' is the first column, not the third).
All of my fuses have slight corrosion on the contacts, so I've used needle-nosed pliers to pull each fuse and reseat it to scrape the contact clean.
Give each one a visual inspection while you are at it and replace any that look less than perfect.
All of my fuses have slight corrosion on the contacts, so I've used needle-nosed pliers to pull each fuse and reseat it to scrape the contact clean.
Give each one a visual inspection while you are at it and replace any that look less than perfect.
-
Topic author - Posts: 46
- Joined: Wed Jan 27, 2021 12:09 am
- Real name: Hélio Sequeira
- Has thanked: 1 time
- Been thanked: 2 times
- Flag:
Re: JCB 3cx project 8 not moving forward/backwards
Hi geko
Thanks for the reply. Lights and engine were all ok and hidráulics worked fine. I managed to entered it on the hangar with the back hohe. Gonna take a close look at ir this morning.
I'll coment to you late....
Thanks for the reply. Lights and engine were all ok and hidráulics worked fine. I managed to entered it on the hangar with the back hohe. Gonna take a close look at ir this morning.
I'll coment to you late....
-
Topic author - Posts: 46
- Joined: Wed Jan 27, 2021 12:09 am
- Real name: Hélio Sequeira
- Has thanked: 1 time
- Been thanked: 2 times
- Flag:
Re: JCB 3cx project 8 not moving forward/backwards
Geko
You are awesome. Changed the fuse and all seems to BE fine again.
Thanks só much
You are awesome. Changed the fuse and all seems to BE fine again.
Thanks só much
-
Topic author - Posts: 46
- Joined: Wed Jan 27, 2021 12:09 am
- Real name: Hélio Sequeira
- Has thanked: 1 time
- Been thanked: 2 times
- Flag:
Re: JCB 3cx project 8 not moving forward/backwards
Here are the photos of the relay fuse box.
You do not have the required permissions to view the files attached to this post.
-
Topic author - Posts: 46
- Joined: Wed Jan 27, 2021 12:09 am
- Real name: Hélio Sequeira
- Has thanked: 1 time
- Been thanked: 2 times
- Flag:
Re: JCB 3cx project 8 not moving forward/backwards
By the way, do you know what is this for and the right way to connect that Wire... It was loosen and i just plugged it that way but don't know if that's the right way. Do you know the function or what's for?
Thanks
Thanks
You do not have the required permissions to view the files attached to this post.
-
- Posts: 308
- Joined: Thu Jul 04, 2019 11:44 am
- Real name: ian
- Has thanked: 125 times
- Been thanked: 114 times
- Flag:
Re: JCB 3cx project 8 not moving forward/backwards
Mine looked just as bad with one wire broken. I cut the two wires back and built an extension. The connector is an EV1 commonly used on fuel injectors, but the standard version won't fit inside that housing. This is the one I ordered and latches correctly while still being able to release it.
https://www.aliexpress.com/item/32686040728.html
Who is online
Users browsing this forum: Bing [Bot] and 15 guests