I spotted this machine on the dobwalls bypass and it looked like abit of a beast!
I know nothing about this machine so if anyone wants to fill us in feel free!
trencher!
-
Topic author - Posts: 175
- Joined: Sat Jul 07, 2007 8:39 pm
- Real name: tone case 590
- Been thanked: 1 time
-
- Posts: 447
- Joined: Sat Oct 11, 2008 11:11 am
- Real name: Gavin
- Location: north east England, UK
- Been thanked: 12 times
- Contact:
Re: trencher!
Looks like a Tesmec-built rig. This company specialises in building large crawler trenchers and another similar machine called a "rock saw", although to be honest, I'm not all too sure what the difference is?
I've never seen any in person, but even in pictures they are behemoths, it'd be nice to see them at work for sure! I know a woman who lives in Odessa (Texas), had two of these Tesmec rigs working some distance behind her house. They have thick rock beds there and the machines were being used to cut trenches into it, apparently the dust cloud could be seen for miles!!
---
Well for some reason I couldn't post another topic covering trenchers, so here's one from today's wanderings just after purchasing a new lens for my camera.
Its certainly not in the same league as the above (possible Tesmec) trencher but since I've never managed to get pictures of one of these before, its something different for me to wander about and annoy people with.
If anyone's wondering, the black stick to the left on the first picture is my monopod which I use with the heavier lens. The last picture contains the only number of any sort which I could see on the machine, apart from an engine part being labelled Ford. The number on the plate is CKA 6958. A parts number perhaps? Ok so the engine is Ford, but what about the machine on which the trencher is mounted, a Ford conversion perhaps, or just Ford powered?
I've never seen any in person, but even in pictures they are behemoths, it'd be nice to see them at work for sure! I know a woman who lives in Odessa (Texas), had two of these Tesmec rigs working some distance behind her house. They have thick rock beds there and the machines were being used to cut trenches into it, apparently the dust cloud could be seen for miles!!
---
Well for some reason I couldn't post another topic covering trenchers, so here's one from today's wanderings just after purchasing a new lens for my camera.
Its certainly not in the same league as the above (possible Tesmec) trencher but since I've never managed to get pictures of one of these before, its something different for me to wander about and annoy people with.
If anyone's wondering, the black stick to the left on the first picture is my monopod which I use with the heavier lens. The last picture contains the only number of any sort which I could see on the machine, apart from an engine part being labelled Ford. The number on the plate is CKA 6958. A parts number perhaps? Ok so the engine is Ford, but what about the machine on which the trencher is mounted, a Ford conversion perhaps, or just Ford powered?
You do not have the required permissions to view the files attached to this post.
Look out that window, Eden isn't burning. Its burnt.
-
- Posts: 315
- Joined: Tue Mar 04, 2008 11:40 pm
- Real name: Tracshovel
- Has thanked: 142 times
- Been thanked: 36 times
- Flag:
Re: trencher!
Gavin,
Looks to me similar to the Barth & Holland machines which were sold here in the Uk. Many of them were based on County/Ford skid units. We used to have one work on the farm doing land drainage during the 80's (when there was still grants available ). Was a pretty good machine, it was a tracked version. I don't know if I have any photos of it.
Looks to me similar to the Barth & Holland machines which were sold here in the Uk. Many of them were based on County/Ford skid units. We used to have one work on the farm doing land drainage during the 80's (when there was still grants available ). Was a pretty good machine, it was a tracked version. I don't know if I have any photos of it.
-
- Posts: 447
- Joined: Sat Oct 11, 2008 11:11 am
- Real name: Gavin
- Location: north east England, UK
- Been thanked: 12 times
- Contact:
Re: trencher!
Hi Tracshovel
Nice to see you on here as well as on FlickR (I'm listed as balacau)!
Thanks for the information.
I'll be keeping an eye out for any sales brochures and leaflets on Barth & Holland from now on as I'd love to know more about this contraption. Its quite possible I saw another one of these machines (if not the same one) on a farm about 2 years back, but I never got a chance to get a picture.
I wonder if its possible to identify the machine using the CKW number...?
Nice to see you on here as well as on FlickR (I'm listed as balacau)!
Thanks for the information.
I'll be keeping an eye out for any sales brochures and leaflets on Barth & Holland from now on as I'd love to know more about this contraption. Its quite possible I saw another one of these machines (if not the same one) on a farm about 2 years back, but I never got a chance to get a picture.
I wonder if its possible to identify the machine using the CKW number...?
Look out that window, Eden isn't burning. Its burnt.
-
- Posts: 1976
- Joined: Fri Oct 17, 2008 3:22 pm
- Real name: craig
- Location: North Yorks
- Has thanked: 156 times
- Been thanked: 374 times
- Flag:
Re: trencher!
Used to use rock saws a lot on concrete runways ,for putting in new runway lighting cable trenches. Ideal for cutting through 600mm of unreinforced PQ concrete. They had a large diameter narrow width wheel with lots of acorn size teeth on like a road planers.
Not all those who wander are lost.
-
- Posts: 92
- Joined: Thu Feb 26, 2009 1:19 pm
- Real name: Ray Bird
- Location: Holsworthy, Devon
Re: trencher!
Looks sort of similar to machine used by Ag Contrators Moores on the devon/cornwall border for doing field drainage, theirs is mounted on tracks with pipe laying kits, stone hoppers/conveyors and backfilling blades for a 1 pass operation. dread to think how much it wighs all in, certainly looks the part strapped down on the back of an artic. Doesn't like wet ground though, not unusual to see it being pulled by a Swinger/dozer (has been known to had to be towed by a pair of 14T machines side by side), suppose tracks reduce ground pressure to that little that it stuggles to bite down to the dry stuff and grip.
-
- Posts: 467
- Joined: Sat May 10, 2008 6:14 pm
- Real name: Geraint Jones
- Location: Carmarthen Wales
- Has thanked: 5 times
- Been thanked: 6 times
Re: trencher!
This is their biggest trencher they make. I'm 5' 7''.
URL of the original image: http://i163.photobucket.com/albums/t311/MYRDDINAPGERAINT/PLANT/PIPELINE/2003_0211Image0046.jpg
URL of the original image: http://i163.photobucket.com/albums/t311/MYRDDINAPGERAINT/PLANT/PIPELINE/2003_0211Image0046.jpg
-
- Posts: 89
- Joined: Sun Apr 27, 2008 10:48 am
- Real name: Colin
- Been thanked: 5 times
Re: trencher!
I know a family business who used to operated Tesmec rock trenchers & saws, we were in their yard one day talking to the gentleman who owned the show & he got a bucket containing teeth for the trencher to show us, in it was a lump hammer used to knock the teeth into the holes in the chain. I forget what metal he said the teeth were made of but the lump hammer had been all but destroyed.
They used to use the machines all over the UK & as far as I know they also did some continental jobs with them. Typical jobs for the saws would be dropping a bridge, they'd be lowloadered in, cut across a bridge deck & back on the lowloader again. He's a very knowledgable man ref the groundwork/plant game & it was very interesting man to talk to him about these trenching/cutting machines.
BB
They used to use the machines all over the UK & as far as I know they also did some continental jobs with them. Typical jobs for the saws would be dropping a bridge, they'd be lowloadered in, cut across a bridge deck & back on the lowloader again. He's a very knowledgable man ref the groundwork/plant game & it was very interesting man to talk to him about these trenching/cutting machines.
BB
-
- Posts: 62
- Joined: Sun Mar 01, 2009 11:18 pm
- Real name: Gary Steen
- Location: Australia
- Has thanked: 1 time
- Been thanked: 14 times
Re: trencher!
I watched this beast in action on a pipeline job in QLD.
She is made by Trencor & runs D11 track chains on the cutting gear so she needs plenty of horsepower!!
The finished trench is top quality; leaves the big excavators for dead.
She is made by Trencor & runs D11 track chains on the cutting gear so she needs plenty of horsepower!!
The finished trench is top quality; leaves the big excavators for dead.
You do not have the required permissions to view the files attached to this post.
-
- Posts: 5422
- Joined: Tue Jun 12, 2007 10:10 pm
- Real name: Nick Drew
- Has thanked: 437 times
- Been thanked: 208 times
Re: trencher!
Wow Gary !!
What a beast of a machine And as you say what a finish to the trench ...Amazing
Thanks for posting
Nick
What a beast of a machine And as you say what a finish to the trench ...Amazing
Thanks for posting
Nick
Digger Man Blog at Earthmovers http://www.earthmoversmagazine.co.uk/?page_id=3092
Digger Man Blog Facebook page, https://www.facebook.com/groups/1422908344617046/
You Tube Channel https://www.youtube.com/channel/UC_PJQrzRauAM6ANLxhhcGFA
Digger Man Blog Facebook page, https://www.facebook.com/groups/1422908344617046/
You Tube Channel https://www.youtube.com/channel/UC_PJQrzRauAM6ANLxhhcGFA
Return to “Misc earthmoving equipment”
Who is online
Users browsing this forum: No registered users and 42 guests