3 cylinder diesel ford engine in Sanderson Fork Lift
Posted: Thu Jun 27, 2019 11:47 am
Has anyone worked on these engines? Any help would be gratefully received.
Am having problems with this engine. Fork lift has been stood for 2 years. I Can't get any diesel fuel through injector pipes on way to injectors. I purchased a barrel to use as a high up diesel tank, pipe led down to filter and got a good supply of fuel to injection pump when bleeding small (8ml) bleeder, but nothing from the injector pipes to the injectors. Injector pump is CAV
On the picture it shows the injector pump. We took end off and inside was rubber seal, like a flat plate, that covered the complete area. On removal of seal saw steel items and everything looked clean. Thought we may find dirt blockage, but everything was clean. We also put on a new filter as at first thought this could be the problem.
Am having problems with this engine. Fork lift has been stood for 2 years. I Can't get any diesel fuel through injector pipes on way to injectors. I purchased a barrel to use as a high up diesel tank, pipe led down to filter and got a good supply of fuel to injection pump when bleeding small (8ml) bleeder, but nothing from the injector pipes to the injectors. Injector pump is CAV
On the picture it shows the injector pump. We took end off and inside was rubber seal, like a flat plate, that covered the complete area. On removal of seal saw steel items and everything looked clean. Thought we may find dirt blockage, but everything was clean. We also put on a new filter as at first thought this could be the problem.