lansing henley hercules 12.900 forklift
lansing henley hercules 12.900 forklift
anyone have any differential parts or know of anyone that might be able to help with new or good used . lansing part no. D026-015-087 or dana/spicer PR3071/1. these machines are nonexistent here in the states. the company purchased this truck new in 1987 . has been a great one. thanks
-
- Moderator
- Posts: 8690
- Joined: Sun Aug 05, 2007 8:36 pm
- Real name: Jeremy Rowland
- Has thanked: 1883 times
- Been thanked: 1696 times
Re: lansing henley hercules 12.900 forklift
Hi Bob and welcome to CMN please give these people a try https://www.hlsmith.co.uk/contact/ they may just be able to help you out.
Jeremy
Jeremy
Re: lansing henley hercules 12.900 forklift
Jeremy thanks for the contact . they were not able to help me. so i am still looking for parts . photo is parts list and axle tag from our machine any help, please. thanks ,bob download/file.php?mode=view&id=52832
You do not have the required permissions to view the files attached to this post.
-
- Moderator
- Posts: 8690
- Joined: Sun Aug 05, 2007 8:36 pm
- Real name: Jeremy Rowland
- Has thanked: 1883 times
- Been thanked: 1696 times
Re: lansing henley hercules 12.900 forklift
Bob looking at the plate it appears that the axle was made by GKN so try an internet search for GKN Forklift axles, somebody somewhere must have the parts you need.
Jeremy
Jeremy
Re: lansing henley hercules 12.900 forklift
Jeremy, dana corp purchased GKN HEAVY in 1995. i spoke to dana rep. last year , he told me the part numbers were good in there system. he could not locate parts here. he told me my best bet was to inquire in the UK. i found the gear set at FULTON forklift in Ireland but the owner of our company muddled that up . so i,m of the option that Carol at FULTON may have had enough of the back and forth nonsense with the owner here. anyways ,still looking. thanks for your shoulder , bob
-
- Moderator
- Posts: 8690
- Joined: Sun Aug 05, 2007 8:36 pm
- Real name: Jeremy Rowland
- Has thanked: 1883 times
- Been thanked: 1696 times
Re: lansing henley hercules 12.900 forklift
Bob this is a long shot but have you considered trying to get the bits made by a gear specialist or would that be too expensive?
Jeremy
Jeremy
-
- Moderator
- Posts: 8690
- Joined: Sun Aug 05, 2007 8:36 pm
- Real name: Jeremy Rowland
- Has thanked: 1883 times
- Been thanked: 1696 times
Re: lansing henley hercules 12.900 forklift
Bob give these people a try https://www.lioncorp-parts.com/forklift ... -forklift/ hope that works out for you.
Jeremy
Jeremy
Re: lansing henley hercules 12.900 forklift
Jeremy Rowland wrote:Bob this is a long shot but have you considered trying to get the bits made by a gear specialist or would that be too expensive?
Jeremy
Jeremy, dana /spicer are the OEM supplier of parts in the axle. they quoted 5 sets (minimum run) at 11,378.50 GBP plus EX works UK. they have been discontinued. anybody need the other 4 ? lol
Re: lansing henley hercules 12.900 forklift
Jeremy Rowland wrote:Bob give these people a try https://www.lioncorp-parts.com/forklift ... -forklift/ hope that works out for you.
Jeremy
Jermey , thanks for the link. i made a request for parts there at lion. is there breakers , salvage companys the in the UK that might be able help? even a good used drop out assembly would work. thanks again for responding. bob bock
Who is online
Users browsing this forum: No registered users and 4 guests