Page 1 of 2

lansing henley hercules 12.900 forklift

Posted: Fri Jan 25, 2019 2:14 pm
by rbock0
anyone have any differential parts or know of anyone that might be able to help with new or good used . lansing part no. D026-015-087 or dana/spicer PR3071/1. these machines are nonexistent here in the states. the company purchased this truck new in 1987 . has been a great one. thanks

Re: lansing henley hercules 12.900 forklift

Posted: Fri Jan 25, 2019 3:03 pm
by Jeremy Rowland
Hi Bob and welcome to CMN :wave: please give these people a try https://www.hlsmith.co.uk/contact/ they may just be able to help you out.

Jeremy

Re: lansing henley hercules 12.900 forklift

Posted: Tue Feb 05, 2019 2:43 pm
by rbock0
Jeremy thanks for the contact . they were not able to help me. so i am still looking for parts . photo is parts list and axle tag from our machine any help, please. thanks ,bob download/file.php?mode=view&id=52832

Re: lansing henley hercules 12.900 forklift

Posted: Tue Feb 05, 2019 3:02 pm
by Jeremy Rowland
Bob looking at the plate it appears that the axle was made by GKN so try an internet search for GKN Forklift axles, somebody somewhere must have the parts you need.

Jeremy

Re: lansing henley hercules 12.900 forklift

Posted: Tue Feb 12, 2019 10:13 pm
by rbock0
Jeremy, dana corp purchased GKN HEAVY in 1995. i spoke to dana rep. last year , he told me the part numbers were good in there system. he could not locate parts here. he told me my best bet was to inquire in the UK. i found the gear set at FULTON forklift in Ireland but the owner of our company muddled that up . so i,m of the option that Carol at FULTON may have had enough of the back and forth nonsense with the owner here. anyways ,still looking. thanks for your shoulder , bob

Re: lansing henley hercules 12.900 forklift

Posted: Thu Jun 27, 2019 8:02 pm
by rbock0
still looking for parts.bob

Re: lansing henley hercules 12.900 forklift

Posted: Fri Jun 28, 2019 7:37 am
by Jeremy Rowland
Bob this is a long shot but have you considered trying to get the bits made by a gear specialist or would that be too expensive?

Jeremy

Re: lansing henley hercules 12.900 forklift

Posted: Fri Jun 28, 2019 7:42 am
by Jeremy Rowland
Bob give these people a try https://www.lioncorp-parts.com/forklift ... -forklift/ hope that works out for you.

Jeremy

Re: lansing henley hercules 12.900 forklift

Posted: Fri Jun 28, 2019 7:51 pm
by rbock0
Jeremy Rowland wrote:Bob this is a long shot but have you considered trying to get the bits made by a gear specialist or would that be too expensive?

Jeremy

Jeremy, dana /spicer are the OEM supplier of parts in the axle. they quoted 5 sets (minimum run) at 11,378.50 GBP plus EX works UK. they have been discontinued. anybody need the other 4 ? lol

Re: lansing henley hercules 12.900 forklift

Posted: Fri Jun 28, 2019 7:57 pm
by rbock0
Jeremy Rowland wrote:Bob give these people a try https://www.lioncorp-parts.com/forklift ... -forklift/ hope that works out for you.

Jeremy

Jermey , thanks for the link. i made a request for parts there at lion. is there breakers , salvage companys the in the UK that might be able help? even a good used drop out assembly would work. thanks again for responding. bob bock