Page 2 of 2

Re: Coventry Climax Forklift Engine

Posted: Wed Jan 03, 2018 8:29 am
by Jeremy Rowland
Blankcanvas wrote:Hi , i have the same make/model forklift i think :-) , im wondering if anyone could direct me to a good source of parts , brakes need doing , i think waterpump on way out and i want to go through it thoroughly starting with full service Thanks Dan


Hi Dan and welcome to CMN :wave: I think you could source the engine parts from Dieperk (I think that's how it's spelled) just look them up using Google they offer genuine Perkins engine parts. Hope that helps. :thumbup:

Jeremy

Re: Coventry Climax Forklift Engine

Posted: Wed Jan 03, 2018 12:03 pm
by Blankcanvas
cheers ill try them also looking for help trying to identify model theres a plate on the mast saying EV-93319-A , would that be forklift serial number ?

Re: Coventry Climax Forklift Engine

Posted: Wed Jan 03, 2018 12:36 pm
by Blankcanvas
Image
Image
Image

Re: Coventry Climax Forklift Engine

Posted: Wed Jan 03, 2018 2:44 pm
by Jeremy Rowland
Dan on some fork trucks the mast has a serial number too so I'm not 100% on that but any decent fork truck company should be able to point you in the right direction. :thumbup:

Jeremy

Re: Coventry Climax Forklift Engine

Posted: Wed Jan 03, 2018 3:20 pm
by mynachdy
Hi Dan,

That number is for the hoist cylinder.

Let me know what you need and I can quote you.

Mike

Re: Coventry Climax Forklift Engine

Posted: Wed Jan 03, 2018 3:28 pm
by Blankcanvas
Thanks Jeremy , back to drawing board so :-)

Re: Coventry Climax Forklift Engine

Posted: Sun Jul 22, 2018 10:15 pm
by rik16v205
Hello,

Your pictures look identical to my forklift truck. I still have the Id plate riveted to the engine cover. Im up the yard on Wednesday so I'll grab a picture.

I have done the brakes on mine. Replaced the master cylinder, new brake lines and freed up the handbrake linkages. The manual adjusters at the bottom had both seized up so rebuilt it on handfulls of copper grease.

Also had the fuel pump pack up from dirt coming through the filter. I now have a new filter housing, electric lift pump instead of the mechanical one. Starts on the turn of a key now. I replaced the steering rack as the seals had gone, and it's now good as gold and in regular work.

Parts came from a chap towards Coventry who used to fix these things. I haven't got his contact details anymore but I'll see if I can find the old receipts.

Cheers
Rich

Re: Coventry Climax Forklift Engine

Posted: Tue Aug 07, 2018 11:54 pm
by rik16v205
Here's the plate, sorry it took so long.

Image