Hi all,
I'm new to the forum (so please excuse any lack of correct etiquette) however i thought this might be the ideal place for some help...
I am currently assisting in a rebuild of a JCB 3C Mk 2 from the 1970's and need to order parts (...many parts!)
I was hoping someone here might be able to share with me a parts/workshop manual for the JCB 3C Mk 2, to assist me? (I already have the operator handbook - thanks to this forum! Much appreciated)
I look forward to any responses.
Thanks!
JCB 3C Mk 2 parts/workshop manual
-
- Moderator
- Posts: 8690
- Joined: Sun Aug 05, 2007 8:36 pm
- Real name: Jeremy Rowland
- Has thanked: 1883 times
- Been thanked: 1696 times
Re: JCB 3C Mk 2 parts/workshop manual
Hi Dominic and welcome to CMN somebody on here will be able to offer you advice on parts; for good used parts Warwick Ward is but one name that springs easily to mind but there are others, some parts may be off the shelf from JCB but are likely to cost an arm and leg, other CMN members will be able to point you in the right direction.
Jeremy
Jeremy
-
- Posts: 806
- Joined: Mon Sep 22, 2008 11:55 pm
- Real name: David
- Location: KENT
- Has thanked: 76 times
- Been thanked: 179 times
- Flag:
Re: JCB 3C Mk 2 parts/workshop manual
You cold also try Simon Vicary just google Vicary JCB spares, also try Jakespare he is not always easy to get hold of. also Eric Warburton, Lastly but not least Rusty Parts up in Yorkshire he is very helpfull.
Return to “Workshop equipment/tools”
Who is online
Users browsing this forum: No registered users and 4 guests