JCB 3C Mk 2 parts/workshop manual

Discuss workshop equipment here

Topic author
Dominic87
Posts: 1
Joined: Tue Aug 21, 2018 10:39 pm
Real name: Dominic Linton
Flag: Great Britain

JCB 3C Mk 2 parts/workshop manual

Post #1 by Dominic87 » Wed Aug 22, 2018 4:10 pm

Hi all,

I'm new to the forum (so please excuse any lack of correct etiquette) however i thought this might be the ideal place for some help...

I am currently assisting in a rebuild of a JCB 3C Mk 2 from the 1970's and need to order parts (...many parts!)

I was hoping someone here might be able to share with me a parts/workshop manual for the JCB 3C Mk 2, to assist me? (I already have the operator handbook - thanks to this forum! Much appreciated)

I look forward to any responses.

Thanks!


Jeremy Rowland
Moderator
Posts: 8667
Joined: Sun Aug 05, 2007 8:36 pm
Real name: Jeremy Rowland
Has thanked: 1867 times
Been thanked: 1688 times

Re: JCB 3C Mk 2 parts/workshop manual

Post #2 by Jeremy Rowland » Thu Aug 23, 2018 9:32 pm

Hi Dominic and welcome to CMN :wave: somebody on here will be able to offer you advice on parts; for good used parts Warwick Ward is but one name that springs easily to mind but there are others, some parts may be off the shelf from JCB but are likely to cost an arm and leg, other CMN members will be able to point you in the right direction.

Jeremy


topkit
Posts: 806
Joined: Mon Sep 22, 2008 11:55 pm
Real name: David
Location: KENT
Has thanked: 75 times
Been thanked: 179 times
Flag: Great Britain

Re: JCB 3C Mk 2 parts/workshop manual

Post #3 by topkit » Sun Oct 07, 2018 10:43 pm

You cold also try Simon Vicary just google Vicary JCB spares, also try Jakespare he is not always easy to get hold of. also Eric Warburton, Lastly but not least Rusty Parts up in Yorkshire he is very helpfull.

User avatar

Holger
Site Admin
Posts: 5640
Joined: Tue Jun 12, 2007 8:13 pm
Has thanked: 232 times
Been thanked: 143 times
Flag: Sweden

Re: JCB 3C Mk 2 parts/workshop manual

Post #4 by Holger » Mon Oct 08, 2018 10:15 am

Welcome to CMN Dominic!
Search for 3c in downloads, there are a few different files that could be of interest for you?
Some resources:
How-To


Return to “Workshop equipment/tools”

Who is online

Users browsing this forum: No registered users and 8 guests