Welcome to the new version of CMN!
Some help showing the new functions How-To

How-to: Browsing the forum effectively

Rail or excavator accident?

Discuss rail plant equipment in this forum.

Topic author
Ianto36
Posts: 49
Joined: Thu Feb 09, 2012 8:59 pm
Real name: Ian
Has thanked: 7 times
Been thanked: 6 times

Rail or excavator accident?

Post #1 by Ianto36 » Thu Jun 21, 2012 1:29 pm

Hi All, :wave:

Didn't know which topic to stick this in is it rail or plant accident?. I work on the tampers on the railway, even i couldn't get this kink out of the track with a bit of adjustment on the lining galvo.Don't think anyone was hurt except somebodys pride!!!

Image
URL of the original image: http://i985.photobucket.com/albums/ae334/yanto36/Bridgestrike3.jpg

Image
URL of the original image: http://i985.photobucket.com/albums/ae334/yanto36/Bridgestrike4.jpg

Image
URL of the original image: http://i985.photobucket.com/albums/ae334/yanto36/Bridgestrike2.jpg

Image
URL of the original image: http://i985.photobucket.com/albums/ae334/yanto36/Bridgestrike1.jpg


Jeremy Rowland
Moderator
Posts: 6728
Joined: Sun Aug 05, 2007 8:36 pm
Real name: Jeremy Rowland
Has thanked: 1000 times
Been thanked: 779 times

Re: Rail or excavator accident?

Post #2 by Jeremy Rowland » Thu Jun 21, 2012 1:45 pm

Think thats a case of "oh Deere" to me. :lol: Nice to meet you at Hillhead Ian :thumbup:

Jeremy

User avatar

Neversweat
Posts: 2414
Joined: Mon Dec 24, 2007 6:10 pm
Real name: Steve
Location: Theale Near Reading Berkshire
Has thanked: 833 times
Been thanked: 688 times
Flag: Great Britain

Re: Rail or excavator accident?

Post #3 by Neversweat » Thu Jun 21, 2012 9:07 pm

Jeremy Rowland wrote:Think thats a case of "oh Deere" to me. :lol: Nice to meet you at Hillhead Ian :thumbup:

Jeremy


Have we a smiley for "groan" Jeremy :lol: :D :thumbup:

Steve

User avatar

canaldrifter
Posts: 123
Joined: Sun Oct 31, 2010 4:42 pm
Real name: Tony Haynes
Has thanked: 8 times
Been thanked: 36 times

Re: Rail or excavator accident?

Post #4 by canaldrifter » Sat Jun 23, 2012 12:46 pm

As an ex-low loader driver, I wonder how that happened. I know the obvious. The load was too high for the bridge, but I've seen loads stuck under low bridges before (not mine I hasten to add). I've never seen one hit with such force that it could dislodge a rail bridge! Normally the angle of the gib and folded dipper arm would force the load under the bridge.

I wonder if the gib was slowly raising as the low loader was in transit? That has happened to me with a 360 degree Hymac. There was a fault in the control valve. Every time we hit a bump, the gib raised itself an inch or so. It couldn't be seen from the cab. Luckily all that happened was a couple of phone lines were brought down before I realised. After that I always chained down the bucket, even with a slew-lock in.

It does look as if that bridge was high enough (5.1m) to allow the excavator underneath, if it was loaded correctly. I really can't believe the driver didn't know how high his load was. It is one of the first fundamental rules for a low loader driver.

Tone


Return to “Rail Plant Equipment”

Who is online

Users browsing this forum: No registered users and 1 guest