Drott BTD6 Radiator Cap Spec and suggestions on fuel problem
Posted: Sat Apr 29, 2017 11:59 am
I have an International BTD6 Drott B6-K3 requiring a replacement radiator cap. Can anybody help with the pressure rating for that particular model.
Secondly the Drott starts and runs for about 15 minutes before starving for fuel. I have checked all lines and there are no leaks, etc.
Any suggestions on this matter would be appreciated as it becomes very frustrating having to hand prime the beast every time it stops.
Alternately I was going to replace the primer pump with an in-line electric pump delivering around 5psi LPH - typically a facet Pump. Any experiences along there lines would be appreciated.
Thanks Guys
Gordon
Secondly the Drott starts and runs for about 15 minutes before starving for fuel. I have checked all lines and there are no leaks, etc.
Any suggestions on this matter would be appreciated as it becomes very frustrating having to hand prime the beast every time it stops.
Alternately I was going to replace the primer pump with an in-line electric pump delivering around 5psi LPH - typically a facet Pump. Any experiences along there lines would be appreciated.
Thanks Guys
Gordon