Hi,
Struggling to find the correct seal kit for the cylinder
I have fitted the rod seals part number 991/00003 they fit fine but the cylinder seal kit that came with it part number 2411/4009 does not fit ? Does anyone know the correct number i should be trying to get,they are old leather type seals for a 100mm cylinder.
JCB 3 1966 CYLINDER SEALS HELP REQUIRED
-
stewarty905
Topic author - Posts: 4
- Joined: Mon Jun 10, 2013 11:52 pm
- Real name: stewart
-
philwheelton
- Posts: 279
- Joined: Sun Nov 06, 2011 2:09 am
- Real name: phil wheelton
- Has thanked: 1 time
- Been thanked: 29 times
- Flag:
Re: JCB 3 1966 CYLINDER SEALS HELP REQUIRED
Which ram are you working on and do you have the rod and cylinder size's
-
martyn williams
- Posts: 6393
- Joined: Mon Nov 03, 2008 8:06 pm
- Real name: MARTYN WILLIAMS
- Location: South Wales
- Has thanked: 296 times
- Been thanked: 359 times
Re: JCB 3 1966 CYLINDER SEALS HELP REQUIRED
I managed to get matched seals for my machines from a Cardiff supplier, called Seal master, they were good quality and not a bad price.They supplied everything including scraper seal.
Martyn
Martyn
-
stewarty905
Topic author - Posts: 4
- Joined: Mon Jun 10, 2013 11:52 pm
- Real name: stewart
Re: JCB 3 1966 CYLINDER SEALS HELP REQUIRED
Phil the rod is 50mm,the cylinder is 100mm,I have done the rod seal thats all fine.
-
stewarty905
Topic author - Posts: 4
- Joined: Mon Jun 10, 2013 11:52 pm
- Real name: stewart
Re: JCB 3 1966 CYLINDER SEALS HELP REQUIRED
This is a picture of the current seals
You do not have the required permissions to view the files attached to this post.
-
stewarty905
Topic author - Posts: 4
- Joined: Mon Jun 10, 2013 11:52 pm
- Real name: stewart
Re: JCB 3 1966 CYLINDER SEALS HELP REQUIRED
another picture of seals only
You do not have the required permissions to view the files attached to this post.
-
smithhymac
- Posts: 104
- Joined: Wed Jun 22, 2011 9:00 pm
- Real name: morgan smith
- Location: Dorset, Great Britain
- Has thanked: 44 times
- Been thanked: 13 times
- Flag:
Re: JCB 3 1966 CYLINDER SEALS HELP REQUIRED
hi there!, this seal type is called 'Chevron seals' and tha size is 3 5/8 inch bore, Manchester seals 01618327922 have these in stock! or at least they did last summer when I resealed the rams on my jcb 3! ask for sally she is very switched on!
Who is online
Users browsing this forum: No registered users and 46 guests