JCB 3C3 hydraulic hose blanks
-
Topic author - Posts: 14
- Joined: Mon Jun 10, 2013 9:16 pm
- Real name: Tom
- Been thanked: 1 time
Re: JCB 3C3 hydraulic hose blanks
Cheers Julian. I poured another 25 litre drum in just now and the level is 1" below the "LOW" level. As far as this JCB is concerned - that'll do! To be fair, it wasn't level when I measured the first time, so 10 litres on top of your estimate is fine.
Re: JCB 3C3 hydraulic hose blanks
Ok, this is reviving an old thread but I'm currently going through this.
My problem is, on removal of the tank plate there seems to be no strainer!
The symptoms on my machine were juddering/noisey hydraulics especially when cold, steering the same. One thing I'm now thinking is could it simply be low oil level as there was only a measly 40 litres came out?
Any info would be appreciated. Pete.
My problem is, on removal of the tank plate there seems to be no strainer!
The symptoms on my machine were juddering/noisey hydraulics especially when cold, steering the same. One thing I'm now thinking is could it simply be low oil level as there was only a measly 40 litres came out?
Any info would be appreciated. Pete.
Re: JCB 3C3 hydraulic hose blanks
This is what I have looking upwards into the tank after plate removal:
Who is online
Users browsing this forum: No registered users and 16 guests