I am going to have a look at getting some bits off of a 64 JCB 3 so I will have a look at the badges. Its a side entry door model, and there is a back end of a 3 + front axle there as well.
I have an older 63/64 one i am breaking but the badges on the loader are rusted away.
Cab is pretty knackered, mirror is gone, some other parts also gone to another guy who is restoring a 3.
Working JCB 3
-
- Posts: 46
- Joined: Fri Nov 08, 2013 10:22 pm
- Real name: Christopher Bremner
- Has thanked: 13 times
- Been thanked: 10 times
- Flag:
- Contact:
-
Topic author - Posts: 104
- Joined: Wed Jun 22, 2011 9:00 pm
- Real name: morgan smith
- Location: Dorset, Great Britain
- Has thanked: 44 times
- Been thanked: 13 times
- Flag:
Re: Working JCB 3
Thanks! Back hoe badges are the same so either would be good if straight and solid! Keep in touch
-
- Posts: 46
- Joined: Fri Nov 08, 2013 10:22 pm
- Real name: Christopher Bremner
- Has thanked: 13 times
- Been thanked: 10 times
- Flag:
- Contact:
Re: Working JCB 3
loader badges missing or rotten. sorry
I cant get the one off the back actor, could spend all day trying to grind it off and not worth my time.
I cant get the one off the back actor, could spend all day trying to grind it off and not worth my time.
-
Topic author - Posts: 104
- Joined: Wed Jun 22, 2011 9:00 pm
- Real name: morgan smith
- Location: Dorset, Great Britain
- Has thanked: 44 times
- Been thanked: 13 times
- Flag:
Re: Working JCB 3
Not looking for them for free, Quite happy with in reason to pay for good straight badges!
-
- Posts: 46
- Joined: Fri Nov 08, 2013 10:22 pm
- Real name: Christopher Bremner
- Has thanked: 13 times
- Been thanked: 10 times
- Flag:
- Contact:
Re: Working JCB 3
I will have a look at getting them off the back actor again next time I'm at my dads. I took the grinder to all the welds but it still wasn't coming off.
I know of another 1 and a half jcb3's if you need any other bits I can have a look.
I know of another 1 and a half jcb3's if you need any other bits I can have a look.
Who is online
Users browsing this forum: No registered users and 67 guests