That looks tidy, is the exhaust further back than normal?
Which transmission does that have?
JCB 3CIII
-
Topic author - Posts: 12
- Joined: Sun Oct 09, 2011 12:50 am
- Real name: rick
- Location: Minnesota
- Contact:
Re: JCB 3CIII
essexpete wrote:That looks tidy, is the exhaust further back than normal?
Which transmission does that have?
Yes it is back further than it should be, that will get fixed when I replace the exhaust flange studs. It has a 4 speed gear transmission and the shuttle shift.
Thanks everyone for the help so far!
Rick
-
- Posts: 2273
- Joined: Sun May 18, 2008 5:18 pm
- Real name: Joe Summerhill
- Has thanked: 8 times
- Been thanked: 56 times
- Flag:
Re: JCB 3CIII
Just a quick one and it might sound like a strange one but how many levers does it have to control the front bucket? I only ask as theres an old 3D about a mile away thats got that styl cab that has 3 levers for the front bucket but has no four in one!
Cheers
Joe
Cheers
Joe
-
- Posts: 542
- Joined: Sat Oct 30, 2010 8:27 pm
- Real name: Mark Rive
- Location: Guernsey
- Has thanked: 33 times
- Been thanked: 26 times
Re: JCB 3CIII
Joes1989 wrote:Just a quick one and it might sound like a strange one but how many levers does it have to control the front bucket? I only ask as theres an old 3D about a mile away thats got that styl cab that has 3 levers for the front bucket but has no four in one!
Cheers
Joe
Joe, my 3c3 donor machine has the 3 levers and a normal front shovel, not even piped for a 6 in 1. The 3 lever control was installed to allow the parrallel lift of the shovel though, hence the later machines all had them. If I'm wrong hopefully someone ( Martyn H) will correct Cheers Mark
-
Topic author - Posts: 12
- Joined: Sun Oct 09, 2011 12:50 am
- Real name: rick
- Location: Minnesota
- Contact:
Re: JCB 3CIII
Joes1989 wrote:Just a quick one and it might sound like a strange one but how many levers does it have to control the front bucket? I only ask as theres an old 3D about a mile away thats got that styl cab that has 3 levers for the front bucket but has no four in one!
Cheers
Joe
Joe mine is a single lever control for the loader and 2 stick for the hoe.
Rick
Who is online
Users browsing this forum: No registered users and 40 guests