4wd whitecab front axle

[jcb3cx4wdwc]

Hi everyone, I have a 3cx 4wd white cab about 1981 or so i think it has the Schindler axle in it but i would like to know has anyone ever replaced the top and bottom bearings on the hub or has anyone got a diagram or bearing numbers.
Many Thanks

[Mark.Rive]

Post your serial number and I'll post the parts diagram and the numbers Mark

[jcb3cx4wdwc]

Hi Mark
heres the serial no its a bit hard to make out as someone sprayed over it at some stage 3CX-4-2953.
Many thanks John

[jcb1968]

Post your serial number and I'll post the parts diagram and the numbers Mark

Hi mark can you post up athe diagram and parts regarding the 4wheel drive steering pins/bushes, as my steering has a lot of play and i don't think they are the orginal pins, just bolts!!
my machine serial# is 295027
many thanks John

[Mark.Rive]

Hi Mark
heres the serial no its a bit hard to make out as someone sprayed over it at some stage 3CX-4-2953.
Many thanks John

That should do it if not let me know

[Mark.Rive]

Post your serial number and I'll post the parts diagram and the numbers Mark

Hi mark can you post up athe diagram and parts regarding the 4wheel drive steering pins/bushes, as my steering has a lot of play and i don't think they are the orginal pins, just bolts!!
my machine serial# is 295027
many thanks John

Here goes John, if its not the right one let me know mark

[jcb3cx4wdwc]

Yes Mark it seems to be the correct one (3cxbj.pdf) but is there any one showing more of the hub on the drawing was hoping to get the bearing numbers.
Thanks again for your help

John

[Mark.Rive]

Yes Mark it seems to be the correct one (3cxbj.pdf) but is there any one showing more of the hub on the drawing was hoping to get the bearing numbers.
Thanks again for your help

John

Here you go

[jcb3cx4wdwc]

Mark, Cheers great job will have to get a start on it soon.
John