Anything Whitlock ( Diggers, dump trucks, cranes et al )
-
- Posts: 4083
- Joined: Fri Jul 13, 2007 12:43 am
- Real name: essexpete
- Has thanked: 853 times
- Been thanked: 694 times
Re: Anything Whitlock ( Diggers, dump trucks, cranes et al )
Only recently read that some Leyland group Ergos could be bought with a fixed cab option. Apart from cost there may have been a weight saving.
-
Topic author - Posts: 1977
- Joined: Fri Oct 17, 2008 3:22 pm
- Real name: craig
- Location: North Yorks
- Has thanked: 156 times
- Been thanked: 374 times
- Flag:
Re: Anything Whitlock ( Diggers, dump trucks, cranes et al )
Tne Whitlock Merton Hymac change time 1972 -
Not all those who wander are lost.
-
- Posts: 31
- Joined: Tue Dec 20, 2011 6:05 pm
- Real name: Pete
- Has thanked: 2 times
- Been thanked: 6 times
- Flag:
Re: Anything Whitlock ( Diggers, dump trucks, cranes et al )
Hi I have driven a couple of Whitlocks in my time, & know to a preserved one (been in same family since 1968). This is a B reg Whitlock Super Major. Interestingly it has a ram & chain slew system, I see the green cabbed Cheek machine, same year, same model still has a cable slew system - this leads me to wonder if this is an aftermarket one off mod? Did Whitlock ever use ram & chain?
The model i drove was a 308 - it had partial side shift with the post on a swinging beam & the slew linkage patent of V J Holopainien - as also used on digger dumper. I drove a larger D reg machine with a fixed centre post & high level opposed slew rams - a system a bit like used on Lewis hoe attachments. Oddly the fixed post unit seemed less rear heavy & more stable. The last thing you might expect.
The model i drove was a 308 - it had partial side shift with the post on a swinging beam & the slew linkage patent of V J Holopainien - as also used on digger dumper. I drove a larger D reg machine with a fixed centre post & high level opposed slew rams - a system a bit like used on Lewis hoe attachments. Oddly the fixed post unit seemed less rear heavy & more stable. The last thing you might expect.
-
- Posts: 1
- Joined: Thu Jul 23, 2020 2:45 am
- Real name: Andrew
- Flag:
Re: Anything Whitlock ( Diggers, dump trucks, cranes et al )
Is this a dinkum Digger or a dozaloda ?
No Backhoe ?
No Backhoe ?
-
- Posts: 4083
- Joined: Fri Jul 13, 2007 12:43 am
- Real name: essexpete
- Has thanked: 853 times
- Been thanked: 694 times
Re: Anything Whitlock ( Diggers, dump trucks, cranes et al )
Hard to say. I wonder if the Loader has been fitted to an agricultural tractor. Most industrial applications would not have 3 point linkage.
-
Topic author - Posts: 1977
- Joined: Fri Oct 17, 2008 3:22 pm
- Real name: craig
- Location: North Yorks
- Has thanked: 156 times
- Been thanked: 374 times
- Flag:
Re: Anything Whitlock ( Diggers, dump trucks, cranes et al )
'Dinkum Digger' was the backhoe.
So yes this is a 'Dozaloda' when they fitted twin bucket rams they renamed them 'Power Shovel'.
Looks like it has Whitlock front axle and the grille guard so probably a Whitlock factory machine .
But Majors are so often a mix of parts after so many years it might not be.
Nice machine.
Craig
So yes this is a 'Dozaloda' when they fitted twin bucket rams they renamed them 'Power Shovel'.
Looks like it has Whitlock front axle and the grille guard so probably a Whitlock factory machine .
But Majors are so often a mix of parts after so many years it might not be.
Nice machine.
Craig
Not all those who wander are lost.
-
Topic author - Posts: 1977
- Joined: Fri Oct 17, 2008 3:22 pm
- Real name: craig
- Location: North Yorks
- Has thanked: 156 times
- Been thanked: 374 times
- Flag:
Re: Anything Whitlock ( Diggers, dump trucks, cranes et al )
Whitlock Dinkum Digger with Dozaloda advert, looks like the Dozaloda was new in Dec 56 previously they fitted trip loaders from I think Sky-Hi .
Craig
Craig
Not all those who wander are lost.
-
- Posts: 1851
- Joined: Thu Aug 09, 2007 3:07 pm
- Real name: IBH
- Has thanked: 12 times
- Been thanked: 90 times
Re: Anything Whitlock
Jeremy Rowland wrote:Do you know who made them Fred? The cab looks very much like the one fitted to the old O&K machines of that period.
Jeremy
The Whitlock 50R tracked excavator, was from the German manufacturer Fuchs, who are now best known for their blue coloured material handlers and part of Terex (via Schaeff Group) since 2001.
Page 4 of the old CMN thread below has some more info:
whitlock 105
in addition, according to the book Whitlock Brothers by Adrian Corder-Birch, Whitlock entered into the agreement with Johs Fuchs Kg in 1968 and that the 50R was a Fuchs 703R model of 3/4 cubic yard class with 14 ft 7 in dig depth. At this time Whitlock were owned by London and Midland Industrials Limited (aka LMI) who owned Whitlock from November 1967 until the sale to Powell Duffryn (PD) for £1.3m (1972) with PD owning Hymac from 4 April 1972. It seems the sale to LMI was precipitated by the death of Carleton Whitlock and the need for more capital to fund the growth and operation of the business.
I believe marketing/production ceased after Hymac acquired Whitlock.
-
Topic author - Posts: 1977
- Joined: Fri Oct 17, 2008 3:22 pm
- Real name: craig
- Location: North Yorks
- Has thanked: 156 times
- Been thanked: 374 times
- Flag:
Re: Anything Whitlock ( Diggers, dump trucks, cranes et al )
The Whitlock 50R was a great success - in NZG model form !
They never stop coming up on Ebay .
They never stop coming up on Ebay .
Not all those who wander are lost.
-
- Posts: 1851
- Joined: Thu Aug 09, 2007 3:07 pm
- Real name: IBH
- Has thanked: 12 times
- Been thanked: 90 times
Re: Anything Whitlock ( Diggers, dump trucks, cranes et al )
A short piece about Whitlock and whether or not they or JCB 'invented' the backhoe loader appeared in the Express & Star regional newspaper and is now on their website as well:
https://www.expressandstar.com/news/Features/2020/11/13/david-looks-to-unearth-the-truth-in-digger-rivalry/
https://www.expressandstar.com/news/Features/2020/11/13/david-looks-to-unearth-the-truth-in-digger-rivalry/
You do not have the required permissions to view the files attached to this post.
Who is online
Users browsing this forum: No registered users and 10 guests