Im just replacing the hydraulic pump driveshaft, and have the top radiator hose. Have found a split, so it needs to be replaced. 3cmk3, manual.
Does anyone have a part number, or a preferred supplier. Quick search on Ebay or the net hasn't revealed anything.
3C mk3 Radiator top hose
-
Topic author - Posts: 313
- Joined: Mon Sep 30, 2013 9:48 pm
- Real name: Richard
- Location: Stafford
- Has thanked: 17 times
- Been thanked: 29 times
- Flag:
-
- Posts: 645
- Joined: Mon Sep 28, 2009 9:49 pm
- Real name: R
- Location: Co Down
- Has thanked: 14 times
- Been thanked: 191 times
- Flag:
Re: 3C mk3 Radiator top hose
Part no.from JCB Parts is 834/00083...........Think it was over £55 plus vat. However Agriline is just a little bit better......
https://www.agrilineproducts.com/top-hose-38213.html
https://www.agrilineproducts.com/top-hose-38213.html
-
Topic author - Posts: 313
- Joined: Mon Sep 30, 2013 9:48 pm
- Real name: Richard
- Location: Stafford
- Has thanked: 17 times
- Been thanked: 29 times
- Flag:
Re: 3C mk3 Radiator top hose
Cheers for that.... ordered.
Just a little bit better price. New pipe clamps as well. Just got to get this new shaft on... damn thing wont slide on... even with a persuader
Just a little bit better price. New pipe clamps as well. Just got to get this new shaft on... damn thing wont slide on... even with a persuader
-
- Posts: 4070
- Joined: Fri Jul 13, 2007 12:43 am
- Real name: essexpete
- Has thanked: 853 times
- Been thanked: 684 times
Re: 3C mk3 Radiator top hose
agrimax wrote:Keep the universal joints the same shape on each end........Don't think there is a master spline either......
I take it you mean keep the yokes spot on in line?
-
Topic author - Posts: 313
- Joined: Mon Sep 30, 2013 9:48 pm
- Real name: Richard
- Location: Stafford
- Has thanked: 17 times
- Been thanked: 29 times
- Flag:
-
Topic author - Posts: 313
- Joined: Mon Sep 30, 2013 9:48 pm
- Real name: Richard
- Location: Stafford
- Has thanked: 17 times
- Been thanked: 29 times
- Flag:
Re: 3C mk3 Radiator top hose
Yes, needed to dress it up with a file and it slipped on. Bought a Discovery 2 since this post, so never got round to completing the refit. Now thats a money pit..
Still need to get the digger sorted. Just ordered a new fan belt, just because its a no brainer not to replace it iff the shafts off.
Anyone know what the locking grub screw size is on these shafts. Didnt come with one...
Still need to get the digger sorted. Just ordered a new fan belt, just because its a no brainer not to replace it iff the shafts off.
Anyone know what the locking grub screw size is on these shafts. Didnt come with one...
-
Topic author - Posts: 313
- Joined: Mon Sep 30, 2013 9:48 pm
- Real name: Richard
- Location: Stafford
- Has thanked: 17 times
- Been thanked: 29 times
- Flag:
Re: 3C mk3 Radiator top hose
Shaft fitted, new rad pipes fitted, and finally got the shaft on and working. Started to dig out my drive and my lad blew a hose on the extendable boom. Ah well, another part to get once this virus lockdown is lifted...
Who is online
Users browsing this forum: No registered users and 66 guests