3d mk3 giring hydraulic brakes

Discuss loaders/backhoes here

Topic author
Posts: 15
Joined: Sat Feb 17, 2018 1:47 pm
Real name: markus polly
Has thanked: 2 times
Been thanked: 1 time
Flag: Austria

3d mk3 giring hydraulic brakes

Post #1 by mpolly » Tue Jun 26, 2018 9:08 pm

hello there
i ve got brake issues on my 3d mk3 /5 dry brakes again
i had em honed and fixed up the masters and slave cylinders and had em
rebuild with custom made oil resistant sealings
so everything was fine braking was hard work for the driver :-)
and now the sealings have got stuck in my master cylinders
so guess they where not that oil resistant
and now i need to rebuild them again
i used hydraulic oil for the brakes which is plenty here :-)

so my question is - is there a rebuild kit out there for the girling master cylinders?

yours markus


Posts: 108
Joined: Thu May 17, 2018 6:08 am
Real name: John
Location: Coopernook. NSW. Australia
Has thanked: 47 times
Been thanked: 30 times
Flag: Australia

Re: 3d mk3 giring hydraulic brakes

Post #2 by cobbadog » Tue Jan 01, 2019 4:33 am

Here in Australia many of the old master and slave cylinders are bored out and have a stainless steel sleeve installed back to original specifications. Then a standard rebuild kit finishes it off.
Cheers Cobba

Return to “Loaders/Backhoes”

Who is online

Users browsing this forum: No registered users and 7 guests