https://www.machinerytrader.com/listing ... 4-jcb-214s
https://www.machinerytrader.com/listing ... Mdltxt=3CX
JCB 3CX Black cab door
-
- Posts: 10
- Joined: Mon Feb 27, 2017 12:19 am
- Real name: Todd Dostal
- Location: Hatfield, MA
- Flag:
Re: JCB 3CX Black cab door
2012 John Deere 2520
2008 John Deere 620i XUV
2008 John Deere Z445
2002 JCB 214e
1972 Massey Ferguson 175
2008 John Deere 620i XUV
2008 John Deere Z445
2002 JCB 214e
1972 Massey Ferguson 175
-
- Posts: 4068
- Joined: Fri Jul 13, 2007 12:43 am
- Real name: essexpete
- Has thanked: 853 times
- Been thanked: 684 times
Re: JCB 3CX Black cab door
cartonj wrote:Yes have tried all national breakers yards. I will try getting a grey or white cab door and modify
Perhaps worth trying Simon Vicary he did seem to have a burnt grey cab. In the short term expensive by the time you mess about changing, painting and glazing but the glass doors were so vulnerable.
Re: JCB 3CX Black cab door
I've had no luck finding a door for a reasonable cost so intend to make a door.
Would anyone have a drawing showing the dimensions of a 3cx door, I will measure the opening but a schematic would be helpful.
Thanks
Would anyone have a drawing showing the dimensions of a 3cx door, I will measure the opening but a schematic would be helpful.
Thanks
-
- Posts: 94
- Joined: Sun Oct 19, 2014 6:32 pm
- Real name: Mike
- Has thanked: 6 times
- Been thanked: 3 times
- Flag:
Re: JCB 3CX Black cab door
Maybe a bit late, but I made a door out of perspex from ebay. Think it was 4mm thick, cost £75. used the other door as a template. Worked perfectly, but haven't gotten round to bending the bottom part. Will just heat it up with a heat gun.
Who is online
Users browsing this forum: No registered users and 22 guests