Rubber Boots for Gearstick and Backhoe Controls

Discuss loaders/backhoes here

Topic author
mikefoxo
Posts: 40
Joined: Thu Dec 20, 2012 11:22 pm
Real name: Michael Fox
Location: Dublin
Has thanked: 3 times

Rubber Boots for Gearstick and Backhoe Controls

Post #1 by mikefoxo » Sat Aug 09, 2014 7:36 pm

The boots on my Dads machine are slowly disintegrating and I'd like to get some new ones to keep the dirt away. Had a quick look on eBay and came up with nothing. Does anyone know where I can get some and what sort of price I'd have to pay? Cheers


agrimax
Posts: 403
Joined: Mon Sep 28, 2009 9:49 pm
Real name: R
Location: Co Down
Has thanked: 7 times
Been thanked: 60 times
Flag: Great Britain

Re: Rubber Boots for Gearstick and Backhoe Controls

Post #2 by agrimax » Sat Aug 09, 2014 9:04 pm

You'll get the gear lever boots on ebay for Leyland tractors.Should be the same,I think. Or here,http://www.tractorspareparts.co.uk/
or http://www.charnleys.com/
Don't know where for the lever boots though.


Steelfab
Posts: 227
Joined: Fri Jan 25, 2008 12:39 pm
Real name: Julian Carder
Location: Uttoxeter, Staffordshire, England
Been thanked: 59 times

Re: Rubber Boots for Gearstick and Backhoe Controls

Post #3 by Steelfab » Tue Aug 12, 2014 12:20 am

The transmission lever gaitor is part number ATJ7376 and I bought mine from Charnleys and its only about £10. The excavator lever boots are expensive from JCB but I do have some new spares if you still need them


Topic author
mikefoxo
Posts: 40
Joined: Thu Dec 20, 2012 11:22 pm
Real name: Michael Fox
Location: Dublin
Has thanked: 3 times

Re: Rubber Boots for Gearstick and Backhoe Controls

Post #4 by mikefoxo » Tue Aug 12, 2014 9:33 am

Thanks for the offer Steelfab but I still have quite a bit of muck to shift inside the cab first! Just last week I cleaned out about 6in of soil,hay, hydraulic oil and two coats from the rear footwell :shock:


Steelfab
Posts: 227
Joined: Fri Jan 25, 2008 12:39 pm
Real name: Julian Carder
Location: Uttoxeter, Staffordshire, England
Been thanked: 59 times

Re: Rubber Boots for Gearstick and Backhoe Controls

Post #5 by Steelfab » Wed Aug 13, 2014 7:43 am

That sounds familiar as I had an archeological dig in my 3C when I first got it and found all sorts in the footwell including an old council time keeping book from the early 1980's who used to own it. Also the fan guards which had been trodden flat


Return to “Loaders/Backhoes”

Who is online

Users browsing this forum: No registered users and 6 guests