JCB_4cx Artic
-
- Posts: 384
- Joined: Mon Jun 28, 2010 8:15 pm
- Real name: grant
- Location: arbroath
- Has thanked: 10 times
- Been thanked: 9 times
- Flag:
Re: JCB_4cx Artic
Going to have to agree with graham on this one if you look closely behind the air cleaner you can see the half moon shape where the front end pivots round.seems strange they would use a non production prototype machine for a dancing diggers demo though
-
Topic author - Posts: 76
- Joined: Wed Jul 14, 2010 9:03 pm
- Real name: victor
- Has thanked: 1 time
- Been thanked: 33 times
- Flag:
Re: JCB_4cx Artic
JCB-4CX Artic actually tipped over on a demo for Mr.JCB who from the start wasn't a big fan of artics. They made two machines; one with and one without an electronic stability aid. Because the demodriver was very nervous, he accidently showed the wrong machine which, on a bank, immidiatly tipped over. Mr.JCB wouldn't hear of any excuses and ordered that the project had to end there and then.
Who is online
Users browsing this forum: No registered users and 13 guests