JCB 3c111 Tacho problems

Discuss loaders/backhoes here

Topic author
Posts: 1
Joined: Mon Oct 01, 2012 9:25 pm
Real name: david dixon
Has thanked: 1 time
Flag: Great Britain

JCB 3c111 Tacho problems

Post #1 by daviddixon2 » Fri Oct 19, 2012 8:54 pm

Hi there! :geek: :geek: New to the forum and have been learning a lot looking at previous posts.Busy renovating an old 3c111 with a 498NT engine.Solved most hings so far but am struggling with the tacho.The cable is in a mess and I cannot locate where it attaches near the injector unit.Can anyone help with either a photo or a description of where to look please? :dizzy:I know that it probably should have a right angle drive but I just don't seem to see any possible point of connection.Could it be blanked off??
Thanks for the help and the great forum :D

Posts: 279
Joined: Sun Nov 06, 2011 2:09 am
Real name: phil wheelton
Has thanked: 1 time
Been thanked: 29 times
Flag: Great Britain

Re: JCB 3c111 Tacho problems

Post #2 by philwheelton » Fri Oct 19, 2012 9:40 pm

If it's a 3C 111 with a 4'98 leyland engine if its got a inline injection pump the cable runs from the back of the pump. But it should have a rotary pump, the tacho cable runs from the front of the engine, on the timing cover it should have a angle drive.

Return to “Loaders/Backhoes”

Who is online

Users browsing this forum: No registered users and 10 guests