Hello i think like you that the problem is linked with the way the oil should fond its passage. If changing the hose won't resolve the problem, i will have to check the Mrv valve that are working on the actionner of the valve block.
Wether a pollution IS restricting the action of the valve Spring or in a worse case the valve block is worn out ans needs to.be replaces or refurbished.I will start by changing the old hose ans if the problem is still on I would take off thé valve block to send it to a hydraulic doctor..
By the way I am looking for any British Breaker that would have second hand hymac parts to send accross thé Channel
Next step for my backhoe IS to'find a flector that link thé Hydralic pump to the motor cranshaft.
Thanks.
Hymac 370 Backhoe valve Block issues
-
- Posts: 129
- Joined: Fri Mar 16, 2012 8:48 pm
- Real name: john
- Has thanked: 16 times
- Been thanked: 56 times
- Flag:
Re: Hymac 370 Backhoe valve Block issues
Black smoke don't mean it's broke, keep it flat out like a badger on a bypass
Re: Hymac 370 Backhoe valve Block issues
Hello, i know them ans i sent may mails but non answers?
I will try again. Thanks you.
I will try again. Thanks you.
-
- Moderator
- Posts: 8690
- Joined: Sun Aug 05, 2007 8:36 pm
- Real name: Jeremy Rowland
- Has thanked: 1883 times
- Been thanked: 1696 times
Re: Hymac 370 Backhoe valve Block issues
Rilouben wrote:Hello, i know them ans i sent may mails but non answers?
I will try again. Thanks you.
This link goes to Tony Flint who has now retired so he will not be answering any emails; I will pm you.
Jeremy
Who is online
Users browsing this forum: No registered users and 8 guests