Ive has a look over it and there’s no extra holes, I think you’re right, I need a different design one like the one below: must be a variant around that year.
JCB 3CX 1987 Slew Lock Fitting
-
Topic author - Posts: 63
- Joined: Wed Oct 26, 2016 8:32 pm
- Has thanked: 13 times
- Been thanked: 4 times
- Flag:
-
Topic author - Posts: 63
- Joined: Wed Oct 26, 2016 8:32 pm
- Has thanked: 13 times
- Been thanked: 4 times
- Flag:
-
Topic author - Posts: 63
- Joined: Wed Oct 26, 2016 8:32 pm
- Has thanked: 13 times
- Been thanked: 4 times
- Flag:
Re: JCB 3CX 1987 Slew Lock Fitting
Does anyone know how to fit these locks from the boom end with the pin that actuates the plate?
Cheers
Cheers
-
Topic author - Posts: 63
- Joined: Wed Oct 26, 2016 8:32 pm
- Has thanked: 13 times
- Been thanked: 4 times
- Flag:
-
- Posts: 309
- Joined: Thu Jul 04, 2019 11:44 am
- Real name: ian
- Has thanked: 126 times
- Been thanked: 114 times
- Flag:
Re: JCB 3CX 1987 Slew Lock Fitting
Good work!
(nice hoses too)
Originally the yoke was held on with high tensile roll pins, so keep the pins greased or it might be too much for the MS screws.
(nice hoses too)
Originally the yoke was held on with high tensile roll pins, so keep the pins greased or it might be too much for the MS screws.
Who is online
Users browsing this forum: No registered users and 56 guests