Jcb 3cx 1985 cab mounts
-
Topic author - Posts: 11
- Joined: Sun Aug 09, 2015 9:55 pm
- Real name: kenneth moncrieff
- Been thanked: 1 time
- Flag:
Jcb 3cx 1985 cab mounts
Anybody know how to replace cab mounts. Big rubber between subframe and wheel arch. Bottom part completly perished.
-
- Posts: 642
- Joined: Mon Sep 28, 2009 9:49 pm
- Real name: R
- Location: Co Down
- Has thanked: 14 times
- Been thanked: 188 times
- Flag:
Re: Jcb 3cx 1985 cab mounts
Yip,loosen nut(probably cut off with grinder!) and jack up cab enough to get mounting up and out. Might need to undo other side as well.
-
Topic author - Posts: 11
- Joined: Sun Aug 09, 2015 9:55 pm
- Real name: kenneth moncrieff
- Been thanked: 1 time
- Flag:
Re: Jcb 3cx 1985 cab mounts
Thanks. Have cut bolt off. Wasnt planning on replacing mount but am replacing lh and rg cab bottom rails as rusted away. Will see if there is any movement.
-
Topic author - Posts: 11
- Joined: Sun Aug 09, 2015 9:55 pm
- Real name: kenneth moncrieff
- Been thanked: 1 time
- Flag:
Re: Jcb 3cx 1985 cab mounts
Done it this morning. Cut both bolts. Used a 5ft bar to lift back of cab and chocked it. Mount fits in with a bit of manipulation. Thanks
Who is online
Users browsing this forum: No registered users and 12 guests