Does anyone have any experience with sorting the brakes out on a Telehandler 525. Mine are squeaking and grab rather than being smooth.
Thanks
JCB telehandler 525 brakes
-
Topic author - Posts: 8
- Joined: Sat Jul 20, 2013 8:25 pm
- Real name: stephen
-
Topic author - Posts: 8
- Joined: Sat Jul 20, 2013 8:25 pm
- Real name: stephen
Re: JCB telehandler 525 brakes
LOL serious though I am thinking of stripping the front hub from memory its similar to a 3CX, any advice welcome.
-
- Posts: 279
- Joined: Sun Nov 06, 2011 2:09 am
- Real name: phil wheelton
- Has thanked: 1 time
- Been thanked: 29 times
- Flag:
Re: JCB telehandler 525 brakes
It's true changing the oil in the axle can stop the noise and grabbing ,when you have drained the oil out try flushing the axle out with hydraulic oil before refilling with axle oil.
-
Topic author - Posts: 8
- Joined: Sat Jul 20, 2013 8:25 pm
- Real name: stephen
Re: JCB telehandler 525 brakes
Thanks, any recommendations on what oil to use and also what oil do I use for the brakes as I would like to flush this through
-
- Posts: 279
- Joined: Sun Nov 06, 2011 2:09 am
- Real name: phil wheelton
- Has thanked: 1 time
- Been thanked: 29 times
- Flag:
Re: JCB telehandler 525 brakes
Jcb gear oil plus for the axle and 10 grade hydraulic oil for the brakes
-
Topic author - Posts: 8
- Joined: Sat Jul 20, 2013 8:25 pm
- Real name: stephen
Who is online
Users browsing this forum: No registered users and 2 guests