Welcome to the new version of CMN!
Some help showing the new functions How-To

How-to: Browsing the forum effectively

Loadall 526-55 faults

Discuss telehandlers here

Topic author
Posts: 3
Joined: Sat Sep 24, 2016 5:26 pm
Real name: Steve
Flag: Great Britain

Loadall 526-55 faults

Post #1 by Tarland » Wed May 10, 2017 2:56 pm


Can anyone suggest solutions or means of investiagting the following faults on a JCB loadall:

1) Hazard warning lights only appear to operate on one side of the vehicle; indicators work perfectly on both sides ???
a) Indicator relay has been changed out
b) Hazard warning light switch seems to be Ok having taken it apart etc.

2) Vehicle only operates in 4 wheel steering mode. The F and R lights dont come on when the axles are aligned straight so unable to change to 2 wheel operation

Any suggestions gratefully recieved. Thanks

Posts: 19
Joined: Tue Apr 04, 2017 7:24 pm
Has thanked: 4 times
Been thanked: 4 times
Flag: Netherlands

Re: Loadall 526-55 faults

Post #2 by kipme » Wed May 10, 2017 10:47 pm

This happend like from the one to the other moment?
Or you noticed some other things before?

Posts: 989
Joined: Mon May 06, 2013 11:02 am
Real name: Paul Griffiths
Has thanked: 373 times
Been thanked: 243 times
Flag: Australia

Re: Loadall 526-55 faults

Post #3 by Mrsmackpaul » Thu May 11, 2017 4:08 am

Mate I know nothing about these at all but if you have had a few things stop I would be looking for a crook earth or ground

Your better to die trying than live on your knees begging

Return to “Telehandlers”

Who is online

Users browsing this forum: No registered users and 1 guest