Ih 3434 hydraulic filters problem

Discuss tractors here

Topic author
internationalgeo
Posts: 11
Joined: Mon Aug 08, 2016 4:10 pm
Real name: george brown
Has thanked: 7 times
Been thanked: 1 time
Flag: Great Britain

Ih 3434 hydraulic filters problem

Post #1 by internationalgeo » Tue Aug 09, 2016 8:41 pm

new to site so this might be on already I'm trying to find out the part No of the hydraulic system the suction filter has No (26193) but cannot
seem to tie up this No at local supplies the return filter is missing so don't even know what it looks like.
The IH 3434 is a industrial model with a separate closed hydraulic system, if anyone can help I would appreciate any reply.
Kind regards
George.


Jeremy Rowland
Moderator
Posts: 8662
Joined: Sun Aug 05, 2007 8:36 pm
Real name: Jeremy Rowland
Has thanked: 1865 times
Been thanked: 1684 times

Re: Ih 3434 hydraulic filters problem

Post #2 by Jeremy Rowland » Tue Aug 09, 2016 9:37 pm

Hi George and welcome :wave: there may be somebody on here who can help you; you could always send a private message to CMN member B100 Loader (Martyn Williams) he has quite a lot of knowledge on Internationals.

Jeremy


v1230nm
Posts: 74
Joined: Sun Feb 23, 2014 5:02 pm
Real name: Neil Milward
Has thanked: 158 times
Been thanked: 50 times
Flag: Great Britain

Re: Ih 3434 hydraulic filters problem

Post #3 by v1230nm » Tue Aug 09, 2016 10:07 pm

Hi George.

I remember these filters from my days in Saville Tractors parts in the 1980's. A local company in Stratford-Upon-Avon, McVeigh Construction had several of these machines at that time and there may be someone still there who might be able to help you. Their phone number is 01789 205803.

Good luck.
Neil (v1230nm)


Topic author
internationalgeo
Posts: 11
Joined: Mon Aug 08, 2016 4:10 pm
Real name: george brown
Has thanked: 7 times
Been thanked: 1 time
Flag: Great Britain

Re: Ih 3434 hydraulic filters problem

Post #4 by internationalgeo » Tue Aug 09, 2016 11:30 pm

Jeremy Rowland wrote:Hi George and welcome :wave: there may be somebody on here who can help you; you could always send a private message to CMN member B100 Loader (Martyn Williams) he has quite a lot of knowledge on Internationals.

Jeremy

thanks will try and get in touch with him


Topic author
internationalgeo
Posts: 11
Joined: Mon Aug 08, 2016 4:10 pm
Real name: george brown
Has thanked: 7 times
Been thanked: 1 time
Flag: Great Britain

Re: Ih 3434 hydraulic filters problem

Post #5 by internationalgeo » Tue Aug 09, 2016 11:37 pm

v1230nm wrote:Hi George.

I remember these filters from my days in Saville Tractors parts in the 1980's. A local company in Stratford-Upon-Avon, McVeigh Construction had several of these machines at that time and there may be someone still there who might be able to help you. Their phone number is 01789 205803.

Good luck.
Neil (v1230nm)

Thanks have taken note of number and will try to ring them tomorrow.
george


larstore
Posts: 4
Joined: Sun Nov 01, 2015 11:57 am
Real name: Lars Tore
Flag: Norway

Re: Ih 3434 hydraulic filters problem

Post #6 by larstore » Wed Jan 11, 2017 10:53 am

I have the same problem! Did you get any information on this?


Topic author
internationalgeo
Posts: 11
Joined: Mon Aug 08, 2016 4:10 pm
Real name: george brown
Has thanked: 7 times
Been thanked: 1 time
Flag: Great Britain

Re: Ih 3434 hydraulic filters problem

Post #7 by internationalgeo » Fri Jan 20, 2017 4:01 pm

hi Lars
Found out suction filter 26193 was made by dresel hydraulics but unfortunately company closed some years ago and filter no longer available so my solution was to buy 1.1/2 inch bsp pipe nipple fitting and Parker suction filter SE75351310. 130L/min 1.1/2 inch bsp which is shorter in lenth
but sits a bit higher in the tank. (brought from RS components on internet)
The return filter no 3066975R91 cross reference to WIX 51161 / NAPA 1161 these numbers was given to me from WIX help line.

hope it was of some help
George


Return to “Tractors”

Who is online

Users browsing this forum: No registered users and 5 guests