new to site so this might be on already I'm trying to find out the part No of the hydraulic system the suction filter has No (26193) but cannot
seem to tie up this No at local supplies the return filter is missing so don't even know what it looks like.
The IH 3434 is a industrial model with a separate closed hydraulic system, if anyone can help I would appreciate any reply.
Kind regards
George.
Ih 3434 hydraulic filters problem
-
Topic author - Posts: 11
- Joined: Mon Aug 08, 2016 4:10 pm
- Real name: george brown
- Has thanked: 7 times
- Been thanked: 1 time
- Flag:
-
- Moderator
- Posts: 8677
- Joined: Sun Aug 05, 2007 8:36 pm
- Real name: Jeremy Rowland
- Has thanked: 1873 times
- Been thanked: 1692 times
Re: Ih 3434 hydraulic filters problem
Hi George and welcome there may be somebody on here who can help you; you could always send a private message to CMN member B100 Loader (Martyn Williams) he has quite a lot of knowledge on Internationals.
Jeremy
Jeremy
-
- Posts: 74
- Joined: Sun Feb 23, 2014 5:02 pm
- Real name: Neil Milward
- Has thanked: 158 times
- Been thanked: 50 times
- Flag:
Re: Ih 3434 hydraulic filters problem
Hi George.
I remember these filters from my days in Saville Tractors parts in the 1980's. A local company in Stratford-Upon-Avon, McVeigh Construction had several of these machines at that time and there may be someone still there who might be able to help you. Their phone number is 01789 205803.
Good luck.
Neil (v1230nm)
I remember these filters from my days in Saville Tractors parts in the 1980's. A local company in Stratford-Upon-Avon, McVeigh Construction had several of these machines at that time and there may be someone still there who might be able to help you. Their phone number is 01789 205803.
Good luck.
Neil (v1230nm)
-
Topic author - Posts: 11
- Joined: Mon Aug 08, 2016 4:10 pm
- Real name: george brown
- Has thanked: 7 times
- Been thanked: 1 time
- Flag:
Re: Ih 3434 hydraulic filters problem
Jeremy Rowland wrote:Hi George and welcome there may be somebody on here who can help you; you could always send a private message to CMN member B100 Loader (Martyn Williams) he has quite a lot of knowledge on Internationals.
Jeremy
thanks will try and get in touch with him
-
Topic author - Posts: 11
- Joined: Mon Aug 08, 2016 4:10 pm
- Real name: george brown
- Has thanked: 7 times
- Been thanked: 1 time
- Flag:
Re: Ih 3434 hydraulic filters problem
v1230nm wrote:Hi George.
I remember these filters from my days in Saville Tractors parts in the 1980's. A local company in Stratford-Upon-Avon, McVeigh Construction had several of these machines at that time and there may be someone still there who might be able to help you. Their phone number is 01789 205803.
Good luck.
Neil (v1230nm)
Thanks have taken note of number and will try to ring them tomorrow.
george
-
Topic author - Posts: 11
- Joined: Mon Aug 08, 2016 4:10 pm
- Real name: george brown
- Has thanked: 7 times
- Been thanked: 1 time
- Flag:
Re: Ih 3434 hydraulic filters problem
hi Lars
Found out suction filter 26193 was made by dresel hydraulics but unfortunately company closed some years ago and filter no longer available so my solution was to buy 1.1/2 inch bsp pipe nipple fitting and Parker suction filter SE75351310. 130L/min 1.1/2 inch bsp which is shorter in lenth
but sits a bit higher in the tank. (brought from RS components on internet)
The return filter no 3066975R91 cross reference to WIX 51161 / NAPA 1161 these numbers was given to me from WIX help line.
hope it was of some help
George
Found out suction filter 26193 was made by dresel hydraulics but unfortunately company closed some years ago and filter no longer available so my solution was to buy 1.1/2 inch bsp pipe nipple fitting and Parker suction filter SE75351310. 130L/min 1.1/2 inch bsp which is shorter in lenth
but sits a bit higher in the tank. (brought from RS components on internet)
The return filter no 3066975R91 cross reference to WIX 51161 / NAPA 1161 these numbers was given to me from WIX help line.
hope it was of some help
George
Who is online
Users browsing this forum: No registered users and 39 guests