Hi all.Yes,it was supposed to read a late 2013 ZX290/5,with 500 hours when i got it.I still have it,now with 5700 hour on it.Spotless body work side and well looked after.Those that are on facebook or Nick`s FB page will know its had some issues with the stick cracking on the bottom side welds,just above the bucket/q/h pin.Been welded 3 times in the last 18 months,under warranty by hitachi,and a local welder.Been fine since it was last welded.Reallyyyyyyyyyyyyyyy,its only a 290,and might be better suited to muckshifting instead of working a quarry face and feeding my crusher.But cant fault it really.I`ve used a ZX470/5 feeding my crusher and a ZX350/5 while mine was being welded/parked up.The 470`s bucket was too big for my crusher really,and i didnt feel i worked any less keeping up with my crusher,and my daily tonage was 3300 odd ton with the 470.I can get 3500t through my crusher with my 290.The 350 was a better size machine,but the bucket was the same size as my 290`s(2cubic m)so only gained a foot or so of extra reach over my 290.A pic of my 290 a few months ago parked up next to its bigger brothers,a ZX670/5 and a ZX470/5.