George Fowell OR Fowler Dumpers
-
- Posts: 505
- Joined: Wed Aug 19, 2020 10:32 pm
- Real name: Tim
- Has thanked: 191 times
- Been thanked: 117 times
- Flag:
Re: George Fowell OR Fowler Dumpers
That's a win then!
CMN Stuff: MF65, Thwaites Nimline, JCB 3CX
Projects: S11a 88" V8 Hybrid, 2 x S111 109"s, Mk11 Mini, Harrison L5A
Ish projects: T25 Camper, ST675R
Just added: Alpine S5 & Bridgeport Mk2
Sorely Missed: Impreza, E39 M5
Projects: S11a 88" V8 Hybrid, 2 x S111 109"s, Mk11 Mini, Harrison L5A
Ish projects: T25 Camper, ST675R
Just added: Alpine S5 & Bridgeport Mk2
Sorely Missed: Impreza, E39 M5
-
- Posts: 48
- Joined: Sun Aug 11, 2019 6:31 pm
- Real name: Vince Punter
- Been thanked: 21 times
- Flag:
Re: George Fowell OR Fowler Dumpers
It starts again. I've been using the dumper for a short while when it started knocking quite bad.
It's now in bits again I've removed the piston and conrod checked the small and big end bearings both have wear and the oil scraper ring is missing when I checked last time they weren't this worm. The big end is _20 I've got a engineer friend coming to measure the crank and pin I'm hoping not to remove the crank fingers crossed
It's now in bits again I've removed the piston and conrod checked the small and big end bearings both have wear and the oil scraper ring is missing when I checked last time they weren't this worm. The big end is _20 I've got a engineer friend coming to measure the crank and pin I'm hoping not to remove the crank fingers crossed
-
Topic author - Posts: 1976
- Joined: Fri Oct 17, 2008 3:22 pm
- Real name: craig
- Location: North Yorks
- Has thanked: 156 times
- Been thanked: 374 times
- Flag:
Re: George Fowell OR Fowler Dumpers
George Fowell dumper Brochure recently bought , first one I have seen.
Note the incredibly small driver
Craig
Note the incredibly small driver
Craig
Not all those who wander are lost.
-
- Posts: 505
- Joined: Wed Aug 19, 2020 10:32 pm
- Real name: Tim
- Has thanked: 191 times
- Been thanked: 117 times
- Flag:
Re: George Fowell OR Fowler Dumpers
Got to love that they show it with hubcaps fitted on the Morris 8 3 stud front wheels!
CMN Stuff: MF65, Thwaites Nimline, JCB 3CX
Projects: S11a 88" V8 Hybrid, 2 x S111 109"s, Mk11 Mini, Harrison L5A
Ish projects: T25 Camper, ST675R
Just added: Alpine S5 & Bridgeport Mk2
Sorely Missed: Impreza, E39 M5
Projects: S11a 88" V8 Hybrid, 2 x S111 109"s, Mk11 Mini, Harrison L5A
Ish projects: T25 Camper, ST675R
Just added: Alpine S5 & Bridgeport Mk2
Sorely Missed: Impreza, E39 M5
-
- Posts: 475
- Joined: Thu May 17, 2018 6:08 am
- Real name: John
- Location: Coopernook. NSW. Australia
- Has thanked: 302 times
- Been thanked: 138 times
- Flag:
Re: George Fowell OR Fowler Dumpers
You guys get all the high tech accessories over there. Seems we are lucky to get a seat.
Cheers Cobba
-
- Moderator
- Posts: 8677
- Joined: Sun Aug 05, 2007 8:36 pm
- Real name: Jeremy Rowland
- Has thanked: 1873 times
- Been thanked: 1692 times
Re: George Fowell OR Fowler Dumpers
cobbadog wrote:You guys get all the high tech accessories over there. Seems we are lucky to get a seat.
You realise you probably had to pay more for the hub caps as they were probably 'optional extras'
Jeremy
-
- Moderator
- Posts: 8677
- Joined: Sun Aug 05, 2007 8:36 pm
- Real name: Jeremy Rowland
- Has thanked: 1873 times
- Been thanked: 1692 times
-
- Posts: 48
- Joined: Sun Aug 11, 2019 6:31 pm
- Real name: Vince Punter
- Been thanked: 21 times
- Flag:
Re: George Fowell OR Fowler Dumpers
Update on my George fowell dumper. Most of the engine is in bits the crank is still in its -30 thou I've been looking for big end shells I've seen-20 & -40 I really don't want to strip it down anymore than necessary the flywheel looks like it would be a nightmare to remove.
Does anyone know how much white metal is on the shells? The engineer has said he could remove 10thou or should I get another engine which would be a shame as this one is on the makers plate regards Vince
Does anyone know how much white metal is on the shells? The engineer has said he could remove 10thou or should I get another engine which would be a shame as this one is on the makers plate regards Vince
Who is online
Users browsing this forum: No registered users and 22 guests