rear wheel, for a winget 3 bolt pattern wanted

[Fess28]

I don't suppose anyone has a rear wheel 16 x 4 ( 3 bolt pattern) that will fit a winget dumper? I have been In contact with winget, they can get one made! but it's very expensive. I'm in the Nottinghamshire area but happy to travel Ian

[essexpete]

Is the centre damaged or the rim?

[Fess28]

Hi essexpete, it's the rim about 1/3 is rotted out. I'm thinking about cutting out the rot and replacing it. But obviously a replacement wheel would be loads easier! But I suppose these challenges make us who we are, but stronger!

[essexpete]

I have no idea but, would some six stud types fit on the 3 stud?

[cobbadog]

Another option is to cut out the good 3 stud hole wheel centre and weld it into a good rim. Sounds scarey but easy to do.

[whhh45]

I don't have a spare one, but you might want to check out local scrap yards or online marketplaces like eBay. Sometimes, you can find used parts at a more reasonable price.

[cobbadog]

Might also try FaceAche Market Place. I have been finding some treasures there of late.

[Fess28]

I don't have a spare one, but you might want to check out local scrap yards or online marketplaces like eBay. Sometimes, you can find used parts at a more reasonable price.

Thanks I've been looking all over the place

[cobbadog]

dont give up. Sometimes parts take a bit of time so start attending swap meets and rallies as well as the online stuff.