Newage 40m gearbox curve top
-
Topic author - Posts: 12
- Joined: Mon Feb 21, 2022 1:41 pm
- Real name: Matt Jones
- Been thanked: 4 times
- Flag:
Newage 40m gearbox curve top
,could anyone help me on the bearing codes for a newage 40m box in a thwaites Orion the input bearing on mine is buggered
-
- Moderator
- Posts: 8687
- Joined: Sun Aug 05, 2007 8:36 pm
- Real name: Jeremy Rowland
- Has thanked: 1881 times
- Been thanked: 1695 times
Re: Newage 40m gearbox curve top
Mattj 345 wrote:,could anyone help me on the bearing codes for a newage 40m box in a thwaites Orion the input bearing on mine is buggered
Is there anything at all left of the old bearings with any identification marking on them? If not measure the bore size required, the thickness and the outside diameter, and try a bearing/drives specialist, tell them what type of bearing it was, roller ball tapered roller etc. Just an idea.
Jeremy
-
Topic author - Posts: 12
- Joined: Mon Feb 21, 2022 1:41 pm
- Real name: Matt Jones
- Been thanked: 4 times
- Flag:
Re: Newage 40m gearbox curve top
I'll have a look when I'm next working on the dumper hopefully its just the one bearing that's gone
Who is online
Users browsing this forum: No registered users and 9 guests