Liner 2550sb
Liner 2550sb
Hi just wondering if anyone has any information on liner 2550sb site dumper with 3cylinder listed diesel engine. I just bought one but The cushion drive coupling between the transfer box and front drive shaft is in tatters. Any help would be greatly appreciated
-
Jeremy Rowland
- Moderator
- Posts: 8676
- Joined: Sun Aug 05, 2007 8:36 pm
- Real name: Jeremy Rowland
- Has thanked: 1873 times
- Been thanked: 1691 times
Re: Liner 2550sb
Hi Candice and welcome 
I would suspect that if this drive is a rubber doughnut type coupling then you should be able to pick one up off EBay or a decent drives/bearings supplier, hope that helps.
Jeremy
I would suspect that if this drive is a rubber doughnut type coupling then you should be able to pick one up off EBay or a decent drives/bearings supplier, hope that helps.Jeremy
-
Slooby
- Posts: 505
- Joined: Wed Aug 19, 2020 10:32 pm
- Real name: Tim
- Has thanked: 191 times
- Been thanked: 117 times
- Flag:
Re: Liner 2550sb
Canice wrote:Flanges are pretty goosed too
No kidding!
Was that a BMW prop donut you were offering up in the background?
Had the original been in better shape I would have suggested measuring up the bush seats to see if you could find some polyurethane inserts that would have been close enough to do the job, but by the looks of things it too looks pretty tired
CMN Stuff: MF65, Thwaites Nimline, JCB 3CX
Projects: S11a 88" V8 Hybrid, 2 x S111 109"s, Mk11 Mini, Harrison L5A
Ish projects: T25 Camper, ST675R
Just added: Alpine S5 & Bridgeport Mk2
Sorely Missed: Impreza, E39 M5
Projects: S11a 88" V8 Hybrid, 2 x S111 109"s, Mk11 Mini, Harrison L5A
Ish projects: T25 Camper, ST675R
Just added: Alpine S5 & Bridgeport Mk2
Sorely Missed: Impreza, E39 M5
Re: Liner 2550sb
Hey slooby, it's actually a donut off a 4x4 transit. My friend services the local electricity board vehicles and I found it across in the scrap yard! Was toying with the idea of sandwiching it between two plates but I don't know if it would take the pressure. Are these couplings in any other dumpers I wonder? I've never knocked across one before
-
Slooby
- Posts: 505
- Joined: Wed Aug 19, 2020 10:32 pm
- Real name: Tim
- Has thanked: 191 times
- Been thanked: 117 times
- Flag:
Re: Liner 2550sb
'Fraid I can't help you on the couplings from other dumpers, our Thwaites is far too old and basic to use something as flash. Replaced plenty of them on the leggy BM's I've owned though, and they looked just like the Transit one.
CMN Stuff: MF65, Thwaites Nimline, JCB 3CX
Projects: S11a 88" V8 Hybrid, 2 x S111 109"s, Mk11 Mini, Harrison L5A
Ish projects: T25 Camper, ST675R
Just added: Alpine S5 & Bridgeport Mk2
Sorely Missed: Impreza, E39 M5
Projects: S11a 88" V8 Hybrid, 2 x S111 109"s, Mk11 Mini, Harrison L5A
Ish projects: T25 Camper, ST675R
Just added: Alpine S5 & Bridgeport Mk2
Sorely Missed: Impreza, E39 M5
-
cobbadog
- Posts: 475
- Joined: Thu May 17, 2018 6:08 am
- Real name: John
- Location: Coopernook. NSW. Australia
- Has thanked: 302 times
- Been thanked: 138 times
- Flag:
Re: Liner 2550sb
G'Day Canice and welcome to the Forum,
I certainly would do my best to make that Ford one fit. It will handle the load no trouble, just need the holes to line up.
I certainly would do my best to make that Ford one fit. It will handle the load no trouble, just need the holes to line up.
Cheers Cobba
-
Jeremy Rowland
- Moderator
- Posts: 8676
- Joined: Sun Aug 05, 2007 8:36 pm
- Real name: Jeremy Rowland
- Has thanked: 1873 times
- Been thanked: 1691 times
Re: Liner 2550sb
cobbadog wrote:G'Day Canice and welcome to the Forum,
I certainly would do my best to make that Ford one fit. It will handle the load no trouble, just need the holes to line up.
I have to agree with "cobba" on this one so long as the holes line up it should take the load so give it a try you have nothing to lose.
Jeremy
Who is online
Users browsing this forum: No registered users and 7 guests