Benford TT2000 dumper info sought

Discuss dumpers here

Topic author
Whitlock 505
Posts: 201
Joined: Sat Aug 29, 2015 10:24 am
Real name: Ian Perrott
Has thanked: 90 times
Been thanked: 88 times
Flag: Wales

Re: Benford TT2000 dumper info sought

Post #11 by Whitlock 505 » Sun Jan 28, 2018 8:22 pm

essexpete wrote:
Whitlock 505 wrote:
FOWLER MAN wrote:Hello Ian,
Can I first apologise as I failed to reply to your PM. :oops:
I assume your dumper has a Petter PH2 engine. If as I suspect the pump is mounted on the engine alongside the bell-housing the bolts will have BSF threads, I can't remember the size.
I may well have some here which you are welcome to. :think:
Give me the length and diameter and I'll check. :thumbup:
Fred.

Hi Fred

I've been after a dumper for a while for welland, the powershuttle one was up for £500 in Monmouth but again the fella sold it, it appeared on ebay for £1800 a few weeks later still with he powershuttle problem

It is a PH2 but the pump is under the steering column, tried other fine thread bolts but no joy.

It's a bit of a strange one this dumper as it has all the hallmarks of a Benford TT2000 until you look at the skip! Which has all the characteristics of a Road Machines of Drayton, double under rams both sides of the skip?


Do you mean an orbitrol type steering unit?

I have found one of these handy although to be fair it was free from a factor.
https://www.ebay.co.uk/i/382349140522?c ... 912&crdt=0


Now that's a timesaver and a gamechanger for all us who left school longer than we wish to remember :bow: thanks

User avatar

FOWLER MAN
Posts: 2358
Joined: Wed Dec 09, 2009 11:28 pm
Real name: fred evans
Has thanked: 1295 times
Been thanked: 1111 times
Flag: Wales

Re: Benford TT2000 dumper info sought

Post #12 by FOWLER MAN » Sun Jan 28, 2018 10:36 pm

Hello again Ian,
!2 mm. is roughly 1/2 inch.
You may find this metric / imperial conversion table useful.
Image


partsman
Posts: 26
Joined: Wed Oct 16, 2013 4:50 pm
Real name: Graham
Been thanked: 4 times

Re: Benford TT2000 dumper info sought

Post #13 by partsman » Fri Feb 02, 2018 6:00 pm

bolt 33 is 5/16" UNF
Graham
www.hydraulicplantservices.com
All dumper parts.


Topic author
Whitlock 505
Posts: 201
Joined: Sat Aug 29, 2015 10:24 am
Real name: Ian Perrott
Has thanked: 90 times
Been thanked: 88 times
Flag: Wales

Re: Benford TT2000 dumper info sought

Post #14 by Whitlock 505 » Fri Feb 02, 2018 11:11 pm

partsman wrote:bolt 33 is 5/16" UNF
Graham
http://www.hydraulicplantservices.com
All dumper parts.

Brilliant
Thanks graham


Return to “Dumpers”

Who is online

Users browsing this forum: No registered users and 17 guests