Stothert & Pitt Dumper..... Help required

Discuss dumpers here

Topic author
olympus51342
Posts: 2
Joined: Fri May 31, 2013 10:27 am
Real name: mark

Stothert & Pitt Dumper..... Help required

Post #1 by olympus51342 » Mon Apr 10, 2017 3:26 pm

Hi
I have a Stothert & Pitt Site rider4wd dumper. I need to replace the hydraulic tip control and wondered if anyone had an idea on who I may be able to purchase the parts from.
The third pic down shows the top view of the hydraulic control. On the middle section the end of the spool is broken off and the lever assy is broken

Mark

siterider.jpg
IMG_1359.JPG
hydraulic tip control middle section broken.JPG
dumper dad.jpg
You do not have the required permissions to view the files attached to this post.


essexpete
Posts: 2681
Joined: Fri Jul 13, 2007 12:43 am
Real name: essexpete
Has thanked: 449 times
Been thanked: 274 times

Re: Stothert & Pitt Dumper..... Help required

Post #2 by essexpete » Mon Apr 10, 2017 9:46 pm

I guess any single double acting spool will do with a built in relief valve , might need some adapters.

http://www.ebay.co.uk/itm/Hydraulic-Log ... 2619361337

You have to check whether or not it is up tom the job and it does seem cheap.

User avatar

FOWLER MAN
Posts: 2141
Joined: Wed Dec 09, 2009 11:28 pm
Real name: fred evans
Has thanked: 947 times
Been thanked: 880 times
Flag: Wales

Re: Stothert & Pitt Dumper..... Help required

Post #3 by FOWLER MAN » Tue Apr 11, 2017 11:08 pm

Hi,
I think I'd have a go at repairing that. :think:
If your not into that sort of thing a good engineering shop may be able to help.
Alternatively I think I would look for a spool valve from another similar sized dumper which you can adapt. That will have the relief valve and all the connections you require, though you may have to adapt the fittings to suit your pipework.
There must be plenty of scrap machines in dealers yards :?: :?:
Fred


Yewman
Posts: 11
Joined: Fri Dec 30, 2016 12:12 am
Real name: Paul Procter
Has thanked: 4 times
Flag: Great Britain

Re: Stothert & Pitt Dumper..... Help required

Post #4 by Yewman » Wed Apr 12, 2017 12:19 pm

Would help if it had a name. Most vehicle manufacturers used proprietary valves, made by Plessey, Vickers, Hamworthy,
Danfoss etc.
Paul


Topic author
olympus51342
Posts: 2
Joined: Fri May 31, 2013 10:27 am
Real name: mark

Re: Stothert & Pitt Dumper..... Help required

Post #5 by olympus51342 » Wed May 16, 2018 2:23 pm

thanks guys
sorry didnt get back to you.
i managed to fabricate the required part and now.... touch wood.... tipping like a good un


Return to “Dumpers”

Who is online

Users browsing this forum: No registered users and 3 guests