Welcome to the new version of CMN!
Some help showing the new functions How-To

How-to: Browsing the forum effectively

ph1 dumper brake set up

Discuss dumpers here

Topic author
nick49
Posts: 6
Joined: Wed Jul 02, 2014 8:57 am
Real name: nick

ph1 dumper brake set up

Post #1 by nick49 » Wed Aug 13, 2014 8:26 pm

Hi,
Brake pedal is attatched to a wire cable and goes to a best way to description a knuckle,which swivels and there are 2 metal rods which goes to either wheel.


Tillywolves
Posts: 245
Joined: Mon Sep 30, 2013 9:48 pm
Real name: Richard
Location: Stafford
Has thanked: 10 times
Been thanked: 16 times
Flag: Great Britain

Re: ph1 dumper brake set up

Post #2 by Tillywolves » Wed Sep 10, 2014 11:05 pm

I repaired my brakes, as the knuckle's had seized up, and wouldnt work properly. My advice is to spray on a good dosing of plus gas, to free up the mechanism, replace the grease nipples of they are blocked, and keep the joints lubed up. My brakes work well now. The solid rods will need some set up if someone has messed them up trying to get the brakes to work.


Return to “Dumpers”

Who is online

Users browsing this forum: No registered users and 2 guests