The Classic Machinery Network

http://www.usedmachineryparts.com/upart ... 49&cur=CAD

is this a miller hitch and why does it have that sterange blocking bar thats removed buy a nut

why do all my excavators have miller hitchs but none acthly say miller tay say case cat jcb volvo

Ruston, i have to ask you this .. but do you have a problem with Miller Quick hitches ?

Martyn

Thats certainly not a miller hitch!!

I think they dont say miller on them because they are dealer fitted! If you bought a machine without a hitch and added it at a later date direct from miller then itwould have it on then!

certainly is a miller manual made and supplied to cat as a pin grabber as opposed to the other type of q-hitch that cat fit on there machines if u look at pic 1 and zoom on pic u can see it says built by miller

volvoabdn wrote:certainly is a miller manual made and supplied to cat as a pin grabber as opposed to the other type of q-hitch that cat fit on there machines if u look at pic 1 and zoom on pic u can see it says built by miller

it certainly does say miller ,maybe a visit to specsavers joe
does not look to bad either

Its a Miller Quick Hitch to fit a Backhoe Loader, Miller couplers are also supplied to Cat.

SB

no just way do they say 30 different names dpending on what brand it fitted to

It is common.
Another example: engcon is delivering rototilts to JCB and Bobcat for installation in the factory. The rototilts will have the JCB and Bobcat brand.

JCB's JS range have factory fitted Miller quick hitches, which are the only ones JCB will give cover to.

Has anybody had any problems with millar quick hitches cracking?