Hello I am rebuilding a JCB 3D MK|| from 1974 can anyone help with the RALL color number
sorry for my bad english i use a translator
JCB3D || color rall
-
VasilMadjarov
Topic author - Posts: 5
- Joined: Sat Jan 07, 2023 9:21 pm
- Real name: Vasil Madjarov
- Has thanked: 1 time
- Been thanked: 3 times
- Flag:
JCB3D || color rall
Last edited by VasilMadjarov on Fri Feb 02, 2024 7:19 am, edited 1 time in total.
-
VasilMadjarov
Topic author - Posts: 5
- Joined: Sat Jan 07, 2023 9:21 pm
- Real name: Vasil Madjarov
- Has thanked: 1 time
- Been thanked: 3 times
- Flag:
-
VasilMadjarov
Topic author - Posts: 5
- Joined: Sat Jan 07, 2023 9:21 pm
- Real name: Vasil Madjarov
- Has thanked: 1 time
- Been thanked: 3 times
- Flag:
Re: JCB3D || color rall
Badly maintained excavator, I bought it with the idea of doing some work of my own, but it turned out that the work was bad and so I started the project of its restoration
Last edited by VasilMadjarov on Fri Feb 02, 2024 7:15 am, edited 1 time in total.
-
VasilMadjarov
Topic author - Posts: 5
- Joined: Sat Jan 07, 2023 9:21 pm
- Real name: Vasil Madjarov
- Has thanked: 1 time
- Been thanked: 3 times
- Flag:
-
Billy26F5
- Posts: 57
- Joined: Thu Jul 06, 2023 8:31 pm
- Location: On Billy
- Has thanked: 8 times
- Been thanked: 17 times
- Flag:
Re: JCB3D || color rall
Looks like a very thorough job, you don't often see a JCB frame bare, as the tractor within is quite a lump by itself without adding all the extras. All looking good, you're fixing many things that get very rusty (anyone in Britain is very aware of why JCB's there get very rusty), I'm keen to see how you get on with the cab (the common rust area, very few are free from it).
Keep going, you'll really enjoy the result.
Sandy
Keep going, you'll really enjoy the result.
Sandy
-
VasilMadjarov
Topic author - Posts: 5
- Joined: Sat Jan 07, 2023 9:21 pm
- Real name: Vasil Madjarov
- Has thanked: 1 time
- Been thanked: 3 times
- Flag:
Re: JCB3D || color rall
With the technical part, I am ready to find the necessary parts of the 1 speed gear and both shafts, crown and pinion. I removed the engine because it is in all the oil to change the gaskets.
I also need a front instrument panel, a rear panel, a cover over the engine and the front grille that I am missing and the headlights. I will bless anyone who can help
I also need a front instrument panel, a rear panel, a cover over the engine and the front grille that I am missing and the headlights. I will bless anyone who can help
Last edited by VasilMadjarov on Fri Feb 02, 2024 7:13 am, edited 1 time in total.
Who is online
Users browsing this forum: No registered users and 51 guests