Hymac 580C restoration
-
Topic author - Posts: 20
- Joined: Sat Dec 13, 2008 8:01 pm
- Real name: Joe McGarry
- Has thanked: 3 times
- Been thanked: 1 time
- Flag:
Hymac 580C restoration
Recently I decided to carry out some work on my Hymac 580C which I have owned for sometime now.I originally started restoring it a couple of years ago but got busy on other work, so it was put on the back burner. At the end of July 2019 I decided I better get cracking on it, I recently posted some progress photos of it on Facebook and have had several request to show whats happening as a topic on CMN. I thought I would start with a bit of history in photo form from when I bought it up until present time.
-
Topic author - Posts: 20
- Joined: Sat Dec 13, 2008 8:01 pm
- Real name: Joe McGarry
- Has thanked: 3 times
- Been thanked: 1 time
- Flag:
Re: Hymac 580C restoration
Hymac 580C information I received about my machine, it was originally owned by George Wimpey sold by mistake to Travis Perkins then to a farmer then a scrap merchant then I bought it. The information above was given to me by the Scottish General Sales Manager who was involved with the machine at the time.
-
- Moderator
- Posts: 8677
- Joined: Sun Aug 05, 2007 8:36 pm
- Real name: Jeremy Rowland
- Has thanked: 1873 times
- Been thanked: 1692 times
Re: Hymac 580C restoration
Hi Joe, a nice early to mid 70's 580C with a Perkins engine she looks a straight machine, needs the cab patching so nowt new there for a machine of that age.
Jeremy
Jeremy
-
Topic author - Posts: 20
- Joined: Sat Dec 13, 2008 8:01 pm
- Real name: Joe McGarry
- Has thanked: 3 times
- Been thanked: 1 time
- Flag:
Re: Hymac 580C restoration
Hi Jeremy, I have a new cab for my Hymac, it came of an ex British Waterways machine and was in really good condition. My brother painted it for me and made a very good job of it. I didn't fit when I should have and it's been moved about my place quite a lot so now I'll have to carry out some slight repairs to the paint work before I install the glass work then fit it back onto my Hymac.
-
- Moderator
- Posts: 8677
- Joined: Sun Aug 05, 2007 8:36 pm
- Real name: Jeremy Rowland
- Has thanked: 1873 times
- Been thanked: 1692 times
Who is online
Users browsing this forum: No registered users and 22 guests