Page 4 of 13
Re: New owner of Hymac 580 B
Posted: Mon Nov 13, 2017 10:15 am
by Andy80
Jeremy you are certainly of much help for me. I really appreciate it
Re: New owner of Hymac 580 B
Posted: Mon Nov 13, 2017 12:22 pm
by Andy80
Santa came early. Two heavy packets delivered to the door this morning!
Re: New owner of Hymac 580 B
Posted: Mon Nov 20, 2017 3:57 pm
by Andy80
I really hate winter. 6 degrees below zero today
20171119_085820.jpg
I manage to clean the gearbox today. But the mess in the bottom was frozen, so i had to defrost it with gas.
Filled up with new oil and bolted it with silicone and new screws.
20171119_115149.jpg
Than i spent some time on the glide rails. They were pretty worn so i welded new flat bar on top of it.
20171119_135448.jpg
20171119_135433.jpg
Now i have to wait for the bearing to arrive before i can do anything more.
Re: New owner of Hymac 580 B
Posted: Tue Nov 21, 2017 8:18 am
by Jeremy Rowland
Nice one Andy
you're getting there with it now.
Jeremy
Re: New owner of Hymac 580 B
Posted: Tue Nov 21, 2017 9:43 am
by Andy80
Thanks! I'm trying
Re: New owner of Hymac 580 B
Posted: Sun Dec 10, 2017 4:44 pm
by Andy80
Rain rain rain. At least i dont have to freeze.
New bearing fitted. It was pretty tight to mount. But finally i made it.
20171209_131020.jpg
20171204_151123.jpg
20171204_193132.jpg
20171205_174041.jpg
Re: New owner of Hymac 580 B
Posted: Sun Dec 10, 2017 4:56 pm
by Andy80
New drive chain fitted. The old drive chain was pretty stretched out.
Old above in the picture
20171209_155052.jpg
Re: New owner of Hymac 580 B
Posted: Sun Dec 10, 2017 5:11 pm
by Jeremy Rowland
Nice work Andy; getting there with it now.
Jeremy
Re: New owner of Hymac 580 B
Posted: Mon Dec 11, 2017 12:21 am
by essexpete
Helif you're not keen!
Re: New owner of Hymac 580 B
Posted: Wed Dec 27, 2017 11:21 am
by Andy80
During the holiday i got time to put the tracks back on.
20171223_112605.jpg
20171223_114809.jpg
20171223_114816.jpg
20171223_121204.jpg
20171223_132503.jpg